The maintenance of explosion-protected vehicles has now become more and more valued by people. There may be many owners who like to do their own work for the explosion-proof car cleaning or more slippery oil on daily maintenance. However, there are always some maintenance areas that we cannot reach or can not think of. Although these parts are difficult to reach at ordinary times, they are crucial to driving safety. 1, the ignition line: to replace every 20,000 kilometers For the maintenance of spark plugs, I believe that many explosion-proof owners will be concerned, but in comparison, only a few owners may also attach importance to the status of the ignition line in the ignition system, most owners have already reached the lover car ignition energy, resulting in high fuel consumption, When the low power or even the fire broke out, they realized that it was the ignition line. Due to the location of the ignition wire and the harsh working environment, there is a high chance of aging and damage. For engines equipped with a three-way catalytic system, the problem of insufficient ignition energy and low power can lead to serious consequences. Therefore, experts pointed out that it is best to replace the ignition line every 20,000 kilometers. 2, brake disc: excessive wear is not comfortable Compared with the brake shoe, the explosion-proof vehicle brake disc is less mentioned by the owners in the daily matters of maintenance. In fact, both are important. Most car owners have been staring at when to replace the brake pads, but they do not pay attention to the deteriorating brake discs. As time passes, it will directly affect brake safety. In particular, when the brake shoe is changed two or three times, it should be replaced. After all, the brake disc wears too much and its thickness becomes very thin, affecting normal driving at any time. 3, generator bearings: driving 60,000 km to carry out maintenance Some people complained that the 4S shop had to be replaced by new ones. In fact, it depends on the specific fault conditions. For example, as long as the generator is maintained according to regulations, the service life can be greatly extended. In general, after the explosion-proof vehicle is driven 60,000 to 80,000 kilometers, it is necessary to overhaul the generator. Similarly, the bearings of pumps, power steering pumps, and air-conditioning compressors should also be checked regularly. The above is the location of the explosion-proof car in the maintenance process is more difficult to encounter, only to do a comprehensive maintenance in order to reduce the occurrence of failure. Hope that the above sharing can help you. Elbow Laser Cutting Machine:
6. The main part of the machine tool is the main part of the whole elbow pipe cutting machine. The cutting function and cutting accuracy of the elbow pipe cutting machine are realized by the main machine part. It is composed of the mechanism and the top positive slag extraction mechanism, auxiliary system (lubrication, gas circuit and water circuit), electric control cabinet, operation screen, operation panel and other parts.
7. The patented design of the mold can solve the industry pain points of poor positioning, unstable clamping and poor cutting accuracy. The clamping is not loose. And the cutting accuracy is high.
8. High adaptability: It has a variety of optical fiber interfaces and is compatible with various mainstream lasers. Elbow Laser Cutting,Elbow Laser Cutting Machine,Elbow Tube Laser Cutting Machine,Elbow Machine For Sales GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com
2. Patented mold design, no loose clamping, high cutting precision
3. The three-dimensional pattern can be modified at any time, saving the cost of making and modifying the stamping die, with higher efficiency and better quality
4. Standard slag extraction module, the inner wall of the pipe is clean and free of iron slag
5. Applicable to a variety of metal materials: carbon steel, stainless steel, aluminum alloy, copper, etc.
Excellent design: Optimized optical configuration and smooth and efficient airflow design significantly improve cutting quality and efficiency.
Slim nozzle design: Modular, slim nozzle design reduces workpiece interference.
Compact structure: extremely light weight and small size, reducing robot load requirements and improving cutting speed and quality.
Is the maintenance of explosion-proof cars really a bit better?
1. Specialized for elbow port processing: flat mouth, open hole, 90° slitting, 45° slitting