There are many kinds of pneumatic pipes, which are generally produced with PU raw materials, with stable quality, high pressure resistance, weather resistance, wear resistance, zigzag resistance, smooth and flexible pipe body, bright color, high elasticity, winding resistance and small bending radius.
The tube body is smooth and flexible, bright color, high elasticity, winding resistance and small bending radius. Temperature range: - 15 - + 70 ℃. Pu Pneumatic Pipe,Pu Air Hose,Pu Pneumatic Hose,Pneumatic Spring Hose, Pu Pneumatic Hose Tubing Glove Industry Co.,Ltd. , https://www.gloveind.com
Summary
This CS995 High-precision Carbon Sulphur Analyzer same with LECO can determine the percentage
of Carbon and Suflur in steel, iron, alloy, nonferrous metal, cement, mineral, glass and othermaterials.
Features
The whole machine adopts the modular design. The electronic circuits is highly integrated, stable and reliable. Adopt high speed sampling chip with high precision and fast. The main unit and computer use USB2.0 interface communication which greatly improve the speed of communication.
The infrared detection unit connect with high frequency furnace by high-speed optical fiber  (patent) which thoroughly to eliminate the high frequency interference.
The new infrared light source which is fever continuously and high efficiency spectrum. Adopt gold plated carbon sulfur analysis pool and high-precision infrared detector. Automatic leak detection for pneumatic system with alarm function.
High precision flow controller guarantee the stability of air flow and inlet gas circuit system. Amd hole metal filter which ensure the complete separation of dust and gas. Automatic cleaning and ash discharge system which thoroughly clean the pipe and reduce dust on the result of analysis.
Technical Parameter
Analysis elements
Carbon and Sulfur
Analysis principle
High-frequency furnace combustion and Infrared absorption detection
Analysis range
C: 0.0005%-6.0000%  S: 0.0005%-0.3500% (can extend to 99.999%)
Sample weight
0.5gÂ
Analysis precision
C:accordance with ISO9556  S:accordance with ISO4935
Sensitivity
C/SÂ 0.1ppm
Analysis time
20~100 seconds adjustable ( normally 35 seconds )
Working period
24Â hours
The working conditions
220V/50Hz,  Temperature 10-30ºC,  humidity <75%
High-frequency furnace
Output power: 2200 W,  Frequency: 20 MHz
Spare parts
Available for 1000 times testing
The warranty
One year
Analysis software
Operation software
Adopt Deiph software compilation, WIN7 English operating software.
User management
User account password protection, support the user to add, delete, permissionsÂ
Settings, and other functions.
Display function
carbon and sulfur with two curves, dynamic display of the real-time data process.
Data processing
The results using ACCESS database storage that can store all data and curveÂ
analysis each time.Random analysis results inquiries which can according to the time, operator,Â
samplename, logo etc.Supply curve/data storage, parameter setting, channel selection, mathematicalÂ
statistics, results correction,Â
curve comparison etc.It can be implemented carbon sulfur work curve and curve fitting in the software.
Printing function
Provides both laboratory and testing station print mode, and can design the printÂ
format.
Diagnosis function
It can detect the sealing of burner and chamber.by the software.
Company Information
WUXI JIEBO ELECTRICAL TECHNOLOGY CO., LTD. is a modern high-tech enterprise, which
professionally dedicated to the research, production, marketing and sale of high-speed analytical instruments, such as Optical Emission Spectrometer, Carbon and Sulfur Analyzer, Furnace Molten Iron Carbon Silicon Analyzer, X-Ray Fluorescence Spectrometer, Hardness Tester, Ultrasonic Flaw Detector, etc.
Factory/Workship/Certificates/Exhibition/Customer's Visit and Site Abroad
installation
Why choose JIEBO?Â
1).Flexible oversea network to provide immediate local response.
2).Create the economic solutions with the facility to manufacture the major equipment in the industry.
3).Creative and practical teamwork.
4).Experienced training system to provide the training of owner's/ plant sub-system operating and maintenance personnel.
5).Perfect supply chain and capable global procurement.
6).Good Systematic management control.
Â
What's the whole order procedure?
1).Inquiry with interested type, quantity through e-mail or directly calling.
2).Negotiate all details about this order.
3).Tell consignee information to make ProformaInvoice.
4).Arrange production as advanced payment reached.
5).Ship out goods as the balance payment received.
6).Send out B/L, CO, and other documents that customers required.
7).Customers signed the good, and engineer fly there to installation.
8).After-sale department call back to survey the customers' satisfication.
Â
What's the Warranty?
1 year after installation. And all life-time maintain.Life-time warranty. Any problem caused by our party within one year from the date of shipment, we will provide free spare parts for the repairment. After one year, we can provide the spare parts, but the user should pay for the related cost, including cost of the spare parts, delivery cost etc.Â
Â
Are customized products accepted?
Yes, of course customized products is acceptable. Just communicate with us.
Product classification
1. Pu pneumatic pipe
2. Pu (polyether) pneumatic pipe
3. Pu (polyurethane) bobbin
4. Pu (polyether) bobbin
difference:
Polyurethane pneumatic pipe is over air type. If it is used for over water, its service life will be affected,
Polyether pneumatic pipe can pass air or water, with more stable physical properties and longer normal service life. It is an ideal material for pneumatic pipe.
The bobbin is wrapped with a layer of fiber in the middle of the common pneumatic pipe. Therefore, the bobbin is more solid, pressure resistant and non explosive than the common pneumatic pipe.
Product selection
What should be considered when choosing the type of plastics for blow molding pneumatic pipe?
The following aspects should be considered in the selection of pneumatic pipe materials.
Whether the wall thickness of the welded blank of the pneumatic pipe can be kept uniform, whether a higher blowing pressure is needed, whether the blowing is uniform, whether the surface of the pneumatic pipe is bright, whether the demoulding is easy, and whether the strength can meet the requirements, etc.
Performance comparison of plastics for blow molding pneumatic pipe. The pneumatic tube formed by blow molding is in thermoelastic state, and its density is smaller than that after cooling and shaping, resulting in shrinkage. For the general size of pneumatic pipe is not strict, forming shrinkage has little effect. But for the pneumatic pipes of specified size, such as some hoses used in precision machines, large shrinkage has a considerable impact. The larger the blowing volume is, the more significant the effect is.
The advantages of extruding and blowing plastic forming pneumatic pipe are less investment in production equipment, simple equipment structure, easy mold manufacturing, high forming of pneumatic pipe during production, uniform temperature control, and various specifications of pneumatic pipe can be formed. The disadvantage is that the wall thickness uniformity of pneumatic pipe is poor.
The advantages of injection blow molding pneumatic pipe are that the plastic pneumatic pipe has good product quality, accurate dimensions, no seams, uniform wall thickness, multi-mode molding production, high degree of automation, which is very suitable for large-scale high-efficiency production of small specifications. The disadvantage is that the investment of equipment and molding die is large, and the operation and production need skilled workers.
Product advantages
Excellent flexibility. The bending radius is small and the bending resistance is good. It has high elastic recovery memory effect.
Wear resistance, tearing and impact. It can resist some non corrosive chemicals and oils. It can circulate inflammable objects and weld.
It can be incinerated into ash 100% and is recognized as an environmental protection product
Good damping, smooth inner wall, low friction coefficient, high medium passing capacity, good flame retardant, non-toxic and tasteless,
The color can be customized on demand for easy pipeline identification.
Applicable range of pneumatic pipe
Assemble all kinds of pneumatic tools, pneumatic automation machinery, air compressor and all kinds of connecting pneumatic components.
performance parameter
Abrasion resistance: 30mg
Ultimate elongation: 390-480%
Burst pressure: 20-30kgf / cm2
Working vacuum: - 25hg60-15kgf / cm2
Tensile strength: 300kgf / cm2
The safety factor ratio of burst pressure and long-time service pressure is 3:1
Tips for pneumatic pipe
Polyurethane pneumatic hose is suitable for compressed air, ordinary industrial water and non corrosive oil. In order to maintain a long service life, it must be used under rated working pressure and ambient temperature. As the temperature rises, the working pressure should be reduced accordingly. If it exceeds the limit, the hose may break. If the fluid temperature is too high or the fluid is corrosive, the hose may break. If the working environment temperature is too high or there is chemical gas in the working space, the hose may crack. If the hose is stored in a wet place or the storage period is too long, the hose may hydrolyze or age, which may lead to fracture
Infrared Carbon and Suifur Analyzer
Next Article
Conveyor Bed Vacuum Drying Equipment for Sale