Analysis of problems in grain screening equipment

Analysis of problems in grain screening equipment

Analysis of problems in grain screening equipment
The physical properties of sesame are different from other oils. In particular, sesame particles are small, and the shape difference is relatively large. Domestic sesame and imported sesame are also very different. For quality inspection, specific instruments are required to assist in the completion, such as electric filter (new national standard) Used to delete sesame seeds. The electric filter (new national standard) is an inspection instrument that tests the impurity content of grains and oil samples, and the content of rice and wolfberry powder in rice and determines the quality grade of the grains. Grain filters have become a very important part of food inspection. In addition, grain and oil testing also often use round powder screening equipment, which is essential for grain and oil testing.
At present, there is no specific production of cleaning equipment for sesame processing. General enterprises are self-made sieves on the spot, and the process is simple and not suitable for large-scale production. The original production equipment mainly has the following problems:
(1) Simple cleaning of raw materials in the early stage: Excessive impurity content, low yield, and high energy consumption. The content of refined sesame is about 1.5%. The procedures are numerous and complicated, the screening path is poor, and energy consumption is high. (2) Poor working environment: The vibration of the production machinery, the screening equipment such as stone removal are not sealed, the dust of the raw material is increased during the cleaning process, and the dust emission device is not discharged at the outlet of the waste product, causing the dust and yellow in the workshop and the plant area to fly upwards. The environment is poor and seriously damages the physical health of operators. (3) Finished product yield is low and breakage rate is high: sesame has many turnovers in the processing process. Due to thin and thick sesame, high oil content, many abrasions cause most of the sesame peel to fall off, forming oil powder sticking to the pipe, screen surface and Fan blades increase the load on the equipment and reduce its life. At the same time, the breakage rate of finished products increased and the overall sesame production rate decreased, which affected the inherent quality of sesame seeds. (4) The equipment is complex and prone to failures: it is mainly manifested in the connection of the equipment, running, running, dripping, and leaking in the screening area. When the material is charged in large quantities, there is a blockage, resulting in damage to the components and even burning of the motor.

Annealed Steel Bar

Annealed steel bar is produced by annealing which is one kind of heat treatment to get proper hardness for machining. Our advantages and more services of annealed steel bar includes:

1) Wide range of diameters from 10mm to 300mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.5um

4) Good straightness: 0.5mm/m to 2mm/m

5) Good roundness: 80% of diameter tolerance

6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11

7) Matched further processing: Grinding, polishing, straightening

8) Anti-rusty package

9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

10) Fast delivery time

Annealed Bar,Scm420 Equivalent,4140 Annealed Hardness,Annealed Steel Properties

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com