Plastic & Rubber Processing Machinery refers to general machinery, which manufacture and processing of rubber and plastic products.
The manchinery is used for EVA, PVC PE fpaming sole, rubber sole, TPR sole, rubber robber, rubber sponge, tyre, ball, rubber ring, rubber pipe, rubber belt, bottl stopper,oil seal, shock-resistant rubber, viscous adhesive tape, elastic tape, masterbatch, ink, electric rubber part, auto rubber product and chemical industrial blending materials.
18 inch refining mill
Advantage
1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.
2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.
3. Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.
4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.
5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.
6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.
The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.
7. The [U" shape frame is whole set casting, but other factory welded together.
8. The machine base is welded by national standard I steel.
Roller diameter (mm)
450
Roller length(mm)
1000
Front roller speed (m/min)
31.9
Speed ratio
1:1.27
Max roller gap(mm)
10
Nip adjustment
Manual
Mixing capacity(kg)
30-50
Power (kw)
55
Motor RPM(r/min)
980
Reducer ratio
35
Reducer model
375+
Gear width
input 70mm, output 140mm
Roller bearing diameter(mm)
300
Bearing model
352960YF
Bearing size(mm)
420×300×192
Machine size(mm)
4700x2000x1700
Machine weight(kg)
10000
Plastic & Rubber Processing Machinery Plastic Processing Machinery,Rubber Processing Machinery,Processing Machine For Plastic,Processing Machine For Rubber SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachines.com
Tpye ZK Single Stage Double Suction Centrifugal Pump are new type of single stage centrifugal pump with high pefformance. They are widely used in delivering liquids to the water plant, circulation water system of airconditioner, pipe net syetem of supplying heated water, construction, drainage
Pumping station, power station, industrial water supply system, ship industry, mine and etc. Type
The technical parameter of type ZK Single Stage Double Suction Centrifugal Pump:
Pumpoutletdiamete Dn: 80~800mm
Capacity Q: 22~11600m3/h
Head H: 7~200mm
Temperature T: -20° C~105° C(Zk )
-60° C~200° C(ZK - R )
Solid parameter ≤ 80mg/L
Permissiblepressure ≤ 2.5Mpa (Zk )
≤ 4Mpa (Zk - R )
TECHNICAL ADVANTAGE
1. Type ZK pumps work stably with less noise and vibration and can work at a lifting speed due to. Short Support at both sides, thus they can be widely used.
2. The pipelines arrangement of type ZK pump looks simple and beautiful due to inlet and outlet at a Same center line.
3. The same rotor of type ZK pumps can be operated at reverse direction to avoid damage to the pumps By water hammer.
4. Unique design of type ZK pumps working at high temperature using middle support to fasten the Pump casing and using cooling seals oil lubrication bearing then pump suitable for working at 200 degree Especially for suppling heated water to pipe net system.
5. Type ZK pump casting parts can be vertically or horizontally mounted acoording to different working Condition, with mechanical seals or packing seals.
6. Type ZK pumps look beautiful with visible lines adopting industrially designing.
COST ADVANTAGE:
1. The efficiency of Zk pumps are 2%~3% higher than the same type pumps due to adopting advanced Hydraulic model and thus minimum the operating costs.
2. The NPSH of type ZK pumps are 1-3 meters lower than the same type split pumps due to using Advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs And extendling the using life.
3. Type ZK pumps are suitable for any site working condition due to using SKF NSK bearing and other Parts chosen by the customers and thus minimize the maintenance costs.
MAINTENANCE ADVANTAGE:
1. It is very easy and simple to replace the mechanical seal due to usine container type machaniacl seal.
2. It is rapid easy to assembly and dismout the rotor parts due to using elastic ripess assembling.
3. It is unnecessary to make adjustment when assembling
Application:
ZK series of Single Stage Double Suction Centrifugal Pump is widely used for water plant, irrigation, drainage pumping station, power station, water circulation of air-conditioning, industrial water supply system, fire system and shipping industry as well as for the general purpose in the oil refining industry.
specification and performance parameter
Model
Capacity(m3/H)
Head (M)
Power(KW)
Rotary speed(rpm)
Efficiency %
6-6/150-78
198
84
55
2900
74
6-6A/150-78A
180
67
45
2900
72
6-9/150-50A
220
52
37
2900
80
6-9A/150-50A
180
43
30
2900
75
12-6/300-90
936
82
300
1450
75
12-6A/300-90A
576
86
260
1450
71
14-6/300-125
1663
100
680
1470
73
32-9/800-76
6600
68
1500
740
88
1200-39
10800
33
1600
500
Â
1200-85
14400
70
3450
745
Â
for more detailed specification and performance data , please contact us directly by email or call.
Main parameter:
Screw Pump-Twin Screw Pump-Fuel Oil Pump
Model NO.: UHB-ZK
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Double Case
Mounting Height: Since Irrigation Centrifugal Pumps
Impeller: Semi-Open
Usage: Pumps
Stage: Single Stage
Type: Double Suction Centrifugal Pump
Suction: Double Suction
Power: Diesel Engine and Electric Motor
Material: Cast Iron, Cast Steel, Stainless Steel
Seal: Gland Packing Seal
Motor Brand: Siemens, Weg, ABB
Head: 5-150m
Flow: 100m3/H- 13000m3/H
Fluid: Clean Water and Any Liquid
Trademark: Sundream
Transport Package: Export Polywood Case
Specification: CE, SGS, ISO9001
Origin: Shanghai
HS Code: 8413709990
General Description: