Froth pumps are the latest generation of foam pump/froth pump based on the advanced technology at home and abroad, including Foam Tank Froth Slurry Pump, High Pressure Slurry Pump. It could eliminate the foam/froth in the slurry in running and work normally even if the feeding slurry is not enough. Froth pump is the ideal products to deliver the frothy slurry, especially in the flotation technique process.
Slurry Froth Pump,Froth Foam Pump,Centrifugal Froth Pump,Foam Tank Froth Slurry Pump,
High Pressure Slurry Pump Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com
Â
1.      Production introduction
Wuxi Shenxi Honeycomb Machinery Factory, supplies honeycomb paperboard lamination line. Honeycomb lamination line makes the honeycomb paperboard from 8 to 100mm thickness automatically. It can make 5000-8000 m2/ shift.
Â
2.      Features of our honeycomb machine:
2.1Â Â The paperboard cutting unit uses two servo motors & ball screw system to make it synchronized and cutting. Tolerance within 2mm/ m.
2.2Â Â Â Belt press unit, worm screws adjust the height of upper press unit continuously and stable. The pressure can be adjusted by springs continuously.
2.3Â Â Â Hot air circulation in the oven, increase the thermal efficiency.
2.4Â Â Â Safety control system according to CE regulations.
2.5Â Â Â Paper will avoid the gluing roller while machine stops, easy to do the adjustment when machine's on.
2.6Â Â Apply glue on paper or honeycomb, both available.
2.7Â Â Heating: steam, electricity, Hot oil all available.
Â
 
3.      Process of paperboard making:
Paper unwind---honeycomb expand---glue applying---- Laminate and belt press---hot board heat----Belt press again---Board oven--- cold press----trim (optional)--- cross cut.
Â
No.
Item
HF(A)-1300 Â
HF(A)-1450
HF(A)-1600
1
Thickness of honeycomb paperboard
8-100mm
2
Maximum width of paperboard (mm)
1300
1450
1600
3
Cardboard cutting precision
+-2mm
4
Length of honeycomb paperboard(after cutting)
>=500mm
5
Applicable paper
180-420gms cardboard paper or Kraft paper
6
Layer of face paper
1
6
Maximum designing speed
20m/min
7
The actual production speed
6-12m/min.(According to the paper dry degree\Glue quality\paper core thickness\Local humidity and other factors to change )
8
Heating drying method
electrical heating
9
Total motor power
30KW
10
Electric heating power
80KW
11
Installation power
120kw
12
Man power
3
13
Layout
50000X4000X2500mm
Features of Foam/Froth Pumps
1. On the bearing house, there is the motor base or motor support, which helps adopt belt drive or direct drive. It is very convenient to change the pulleys to adjust the speed and meet the changes of the work conditions.
2.The box is made of steel, stainless steel or rubber lined steel. It has the feeding suction and overflow box in the tangent line. The overflow box could deliver the surplus slurry back to the pool. The feeding suction in the tangent line could transport the slurry fast and eliminate part of the froth.
3. Froth pumps are of double-casing. The materials of the wet parts could be metal alloy, rubber or other non-metal material according to the slurry properties.
Application of Froth Pumps
It is used widely in the metallurgy, minerals, coal washery, chemical and other industrial departments, suitable for handing the abrasive and corrosive slurry with the froth.
High Quality 100mm Thickness Honeycomb Board Machine