7yp-1450dB2/Transportation/Load/Carry for 500kg -3tons Three Wheeler Dumper with Cabin

7yp-1150DB2/Transportation/Load/Carry for 500kg -3tons Three Wheeler Dumper with Cabin

 

Company profile:

Shifeng group was founded in May 18, 1993, covering an area of 5000 acres, with a total assets of 20 billion yuan, and employs 30000 people. The main products are three wheeled cars, low speed trucks, light truck cars, electric sightseeing cars, tractors, engines, tyres and combine harvesters.



Product profile:



Shifeng farm vehicles, including three wheeled vehicles and low speed trucks. With increasingly sophisticated configuration, complete functions and perfect shape, single row, platoon, half, leading models alone lead the trend of the times. Equipped with warm air, electricity, start, dump and other devices. Optional circulating water evaporation, diesel engine, power capacity.


Our factory:





Specification of three wheelers:
 

MODEL NO.	SEMI CLOSED	SIMPLE SHED	FULL SEAL
CABIN	HALF	WITH SUNSHADE	ONE ROW
OVERALL DIMENSION	4100×1550×1690	4250×1550×1690	4250×1550×1690
CARGO BODY DIMENSION	2350×1500×400	2500×1500×400	2500×1500×400
TOTAL GROSS WEIGHT	1000KGS	1100KGS	1100KGS
LOADING CAPACITY	2500KGS	3000KGS	3000KGS
FUEL	DIESEL	DIESEL	DIESEL
WHEELBASE(mm)	2700	2885	2885
REAR TREAD(mm)	1335	1435	1435
FRONT TYRE	600-16	600-16	600-16
REAR TYRE	700-16	750-16	750-16
TRANSMITING TYPE	BELT	BELT	BELT
ENGINE	ZS1110,ZS1115	ZS1110,ZS1115	SF148,ZS1110,ZS1115
OUTPUT	20HP,22HP	20HP,22HP	25HP,20HP,22HP
	13.2kw,14.7kw	13.2kw,14.7kw	18.38kw,13.2kw,14.7kw
ENGINE RATED SPEED(r/min)	2200	2200	2200
ENGINE TOTAL DISPLACEMENT(L)	1.09,1.19	1.09,1.19	1.448,1.09,1.19
ENGINE BORE X STROKE	110×115,115×115	110×115,115×115	125×118,110×115,115×115
CLUTCH TYPE	DUAL,DRY	DUAL,DRY	DUAL,DRY
GEAR BOX	8+2	6+1	6+1
SPEED RATIO	HIGH: 10.27/6.326/4.157/2.976  R:14 LOW: 31.78/19.57/12.86/9.208  R:43.3	HIGH: 13.6/5.39/3.13  R:19 LOW: 37.9/15/8.71  R:19	HIGH: 13.6/5.39/3.13  R:19 LOW: 37.9/15/8.71  R:19
FUEL CONSUMPTION(L/100KM)	3	3	3.5

Main Features
1.Strong Power:Japanese Yanmar Technology & German BOSCH injection system, Single cylinder diesel engine, with Strong output and high torque.
2.Extra loading capacity: 3 tons capacity.
3. Good performance in Off-road conditions, High ground clearance, Adopt to various rough roads,
4.Fuel consumption: Upto 3 Liters/100km, economic, comparing lowest in the current models.
5.Easily operation and maintenance: Spare parts and services are easily managed.
6.Technical supporting and Modification according to customers' requirements are available.
7.Driving Comfort: The vehicle cab interface adopts ergonomic design, thus reduces the fatigue of the driver.
 

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

• Good dimensional accuracy
• Smoother cast surface finish than sand casting
• Improved mechanical properties compared to sand casting
• Thinner walls can be cast compared to sand casting
• Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
• Steel pins and inserts can be cast in to the part
• Faster production times compared to other processes.
• Once the tolling is proven, the product quality is very repeatable.
• Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , https://www.hsiindustriel.com