Reasons vary: 280,000 cars were recalled in June

Since the beginning of 2017, car recalls have been commonplace. There were nearly 10 recalls in June alone. Is the quality of the car too poor? Manufacturers cut corners too much? In fact, this pot really should not be all manufacturers back, the car is a complex structure of the product, just the manufacturer is not enough to lead the car manufacturing technology, which is not related to the quality of Auto Parts , basically the mainstream brands have recalled events However, it is just different ways for car companies to deal with problems.

Including original imports, joint ventures and autonomous models, nearly 280,000 vehicles were recalled, and the reasons for the recall were different. This article will arrange the domestic automobile recall information in June for your reference.

2015 Road Runners

Starting recall time: June 6, 2017

Recall quantity: 267 cars

Recall vehicle production date: January 23, 2017 to March 20, 2017

Reason for recall: The front seat side airbags of some vehicles in this recall range have caused chemical composition (Zr/KP) mixing ratios to be improper due to production process problems of airbag suppliers, and they have collided on the side of the vehicle and reached the front seats. When the side airbag deploys, the airbag inflator may not ignite, causing the airbag to fail to deploy properly, posing a potential safety hazard.

Solution: Jiangling Motors Co., Ltd. will check and replace defective seat side airbags for the vehicles within the recall scope to eliminate potential safety hazards.

Beijing Mercedes-Benz C-class, E-class

Time to start recall: June 20, 2017

Recall quantity: 55 vehicles

Recall vehicle production date: August 30, 2014 to September 20, 2016

Reason for recall: Some vehicles in this recall scope may not meet the requirements due to the manufacturer's manufacturing deviation. Once the pin is completely loose, it will cause the vehicle to steer the deviation, increase the risk of the vehicle colliding, and there is a safety hazard.

Treatment measures: Beijing Benz Automobile Co., Ltd. will replace the electronically-assisted steering gears in the recalled vehicles to eliminate potential safety hazards.

Mercedes-Benz GLA

Start recall time: June 30, 2017

Recall quantity: 533 cars

Recall vehicle production date: October 25, 2016 to December 9, 2016

Reason for recall: Some vehicles in the recall scope have not achieved the required mixture ratio of propellant in the airbag igniter due to the manufacturer's manufacturing deviation. As a result, the airbag cannot be opened properly in the event of a vehicle collision, increasing the risk of passenger injury. ,There are security risks.

Solution: Beijing Benz Automobile Co., Ltd. will replace the airbag module for free within the recall scope to eliminate potential safety hazards.

New Shengda

Start recall time: July 31, 2017

Recall quantity: 43764 vehicles

Production date of recalled vehicles: The new Shengda production date with the 2.4L THETA GDI engine imported from South Korea was 29,937 vehicles from November 29, 2012 to May 31, 2013; the new Shengda equipped with a 2.0T THETA GDI engine imported from South Korea The production date is from November 29, 2012 to November 30, 2013, a total of 13,827 vehicles.

Recall reason: In the recalled vehicle, due to the poor removal of burrs from the crankshaft cross oil hole, the generated metal debris prevented the oil from flowing to the main bearing, resulting in insufficient lubrication of the bearing and accelerated aging of the bearing. As a result, a periodic knocking sound is generated inside the engine, and the engine fault light and the oil warning light are lighted. After a long time of use, the axis may be hung and the vehicle may lose power, causing a safety hazard.

Treatment method: Beijing Hyundai Motor Co., Ltd. will use the engine-specific noise measurement instrument to detect the engine of the vehicle in the recall range, and according to the test results, replace engine oil free of charge for free vehicles, and replace engine long cylinders for problem vehicles free of charge. To eliminate security risks.

Kia K5

Start recall time: July 31, 2017

Recall quantity: 28 vehicles

Recall vehicle production date: January 26, 2014 to March 12, 2014

Reason for recall: In the recalled vehicle, due to the poor removal of machining burrs from the crossover oil hole in the crankshaft, the generated metal debris impeded the flow of oil to the main bearing, resulting in insufficient lubrication of the bearing and accelerated aging of the bearing, which may cause cycles inside the engine. Knocking sound, engine fault light, and oil warning light will be on. After a long time of use, the axis may be held up, and the vehicle loses its power and there is a potential safety hazard.

Solution: Dongfeng Yueda Kia Motors Co., Ltd. will inspect the engine of the vehicle within the recall range and replace the engine's long cylinder if necessary to eliminate potential safety hazards.

Mg MG3 AMT

Starting recall time: September 30, 2017

Number of recalls: 32,165

Recall vehicle production date: November 15, 2010 to January 31, 2013

Reason for recall: Vehicles within the scope of this recall, due to quality problems of transmission control module software and transmission harness, may cause misjudgment of the system when some vehicles are shifting, causing the vehicle fault lamp to light, and the vehicle power is limited. In extreme cases, the vehicle will enter neutral and power interruption will occur, posing a security risk.

Solution: SAIC Passenger Vehicle will check the vehicles in the recalled area, refresh the software and replace the improved transmission wiring harness to eliminate potential safety hazards.

2016 new Passat

Starting recall time: June 9, 2017

Recall quantity: 146 vehicles

Recall vehicle production date: August 25, 2016 to November 4, 2016

Reason for recall: Some vehicles in the recalled area may have electronic faults in the electromechanical unit in the transmission due to suppliers' manufacturing reasons, which may cause the power output of the vehicle to be interrupted, causing potential safety hazards. When the above conditions occur, functions such as vehicle steering and braking are not affected.

Solution: SAIC Volkswagen Automotive Co., Ltd. will replace the gearbox electromechanical unit for recalled vehicles for free to eliminate potential safety hazards.

Imported SLC series cars

Start recall time: June 30, 2017

Recall quantity: 420 cars

Recall vehicle production date: February 8, 2016 to November 23, 2016

Recall reason: Some vehicles in this recall range do not meet the requirements due to ESP software programming. When the vehicle's driver assistance system (such as adaptive cruise control) activates the automatic brake, it immediately terminates, and some pressure will remain in the brake system. The driving resistance may cause the performance of the braking system to attenuate and affect the braking effect. When this phenomenon occurs when the vehicle is running at a low speed until it stops, it may generate smoke near the wheels, which may cause safety hazards.

Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will upgrade ESP software for recalled vehicles for free to eliminate defects.

Imported Mercedes-Benz A-class, B-class, CLA-class, GLA-class

Start recall time: June 30, 2017

Recall quantity: 946 cars

Recall vehicle production date: August 8, 2016 to October 17, 2016

Reason for recall: Some vehicles in the recall scope have not achieved the required mixture ratio of propellant in the airbag igniter because of the manufacturer's manufacturing deviation. As a result, the airbag cannot be opened properly in the event of a vehicle collision, increasing the risk of passenger injury. ,There are security risks.

Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will replace the airbag module for the vehicle within the recall scope free of charge to eliminate potential safety hazards.

Imported 2014-2017 President, Geberit, and Levant

Start recall time: June 30, 2017

Number of recalls: 31,621

Production date of recalled vehicles: Imported 2014-2017 President's production date is from March 22, 2013 to December 15, 2016, a total of 11,815 vehicles; imported 2014-2017 Geberit production date is September 12, 2013 As of November 25, 2016, a total of 14004 vehicles were imported; the imported Levante 2017 production date was from May 12, 2016 to December 21, 2016, a total of 5,802 vehicles.

Reason for recall: Due to the improper design of the front seat wiring harness in some vehicles within this recall range, the front seat harness may interfere with the friction of the seat adjustment motor housing. After long-term use, the seat harness may be damaged and the seat cannot be adjusted. Under certain conditions, it may cause electric short circuit in the seat wiring harness and cause fire, which may cause safety hazards.

Solution: Maserati (China) Automobile Trading Co., Ltd. will conduct inspections of the front seat harnesses involving the recalled vehicles. If necessary, the front seat harnesses will be replaced and new seat wiring harnesses will be arranged; Replace the front seat harness breakers of the 2017 models with 25 A standard fuses to eliminate defects.

Imported Kia Sorrento 2012

Start recall time: June 30, 2017

Recall quantity: 40 vehicles

Recall vehicle production date: August 29, 2011 to October 21, 2011

Reason for recall: Some vehicles in this recall range may have cracks due to insufficient fatigue resistance of the engine's low-pressure fuel hose, resulting in fuel leakage. If there is any ignition source nearby, it may cause fire and there are potential safety hazards.

Approach: Hyundai Motor (China) Investment Co., Ltd. will replace the improved fuel hoses for the vehicles within the recalled area free of charge to eliminate defects.

Imported 2013 Kia Paar

Start recall time: June 30, 2017

Recall quantity: 601 vehicles

Recall vehicle production date: August 27, 2012 to June 9, 2013

Reason for recall: Due to insufficient tightening torque of the front hub locking nut during the assembly of some vehicles in this recall area, the locking nuts of the front hub may be loosened, which may cause abnormal noise or vehicle vibration at the front wheels while the vehicle is moving. . If noise or vibration is ignored, the wheels may come off and there is a safety hazard.

Solution: Hyundai Motor (China) Investment Co., Ltd. will replace the improved front wheel hub lock nut for the vehicles within the recall scope and increase the tightening torque to eliminate defects.

Imported 2011-2012.25 years V8 Vantage and V8 Vantage S

Start recall time: June 30, 2017

Recall quantity: 103 vehicles

Recall vehicle production date: February 23, 2011 to August 15, 2012

Reason for recall: If some of the vehicles in the recall scope do not delete the clutch operating parameters stored in the original computer and re-learn the vehicle settings during the upgrade of the transmission software, the transmission may enter the “clutch protection” mode. In some cases, the engine may be turned off and there is a safety hazard.

Solution: Aston Martin Lada (China) Automobile Sales Co., Ltd. will check vehicles in the recall area free of charge, refresh the gearbox software, delete the previously stored clutch set values, and perform clutch tuning training. To eliminate defects. At the same time, in order to improve customer satisfaction, Aston Martin Lada (China) Automobile Sales Co., Ltd. will provide consumers with a free clutch replacement and one-year Clutch Parts warranty service.

Imported 2012 V8 Vantage

Start recall time: June 30, 2017

Recall quantity: 9 vehicles

Recall vehicle production date: September 19, 2011 to November 3, 2011

Reason for recall: Some vehicles in the recalled area have used a redesigned buckle at the hydraulic joint of the transmission clutch hydraulic system. In some cases, the joint may be fatigued, causing hydraulic oil to leak, causing the transmission to fail. Transform gear, there is a security risk.

Solution: Aston Martin Lakoda (China) Automobile Sales Co., Ltd. will replace the improved clutch pipe joints for free in the recalled area to eliminate defects.

Imported 2011-2014 V8 Vantage and V8 Vantage S

Start recall time: June 30, 2017

Recall quantity: 138 cars

Recall vehicle production date: February 23, 2011 to September 13, 2013

Reason for recall: Some vehicles in this recall range have no effective fixation due to the clutch pipe joints of the transmission clutch hydraulic system. Under certain circumstances, this joint may be fatigued, causing hydraulic oil to leak, causing the transmission to fail to change. Gears, there are security risks.

Solution: Aston Martin Lada (China) Automobile Sales Co., Ltd. will install additional fixed brackets for vehicles within the recall area free of defects.

Imported 2017 XC90

Start recall time: July 3, 2017

Recall quantity: 595 vehicles

Recall vehicle production date: September 23, 2016 to November 8, 2016

Reason for recall: Some vehicles in this recall scope have manufacturing reasons due to suppliers, and the third row of right seat belt pretensioners has erroneous production parameters in production, causing improper crimping of the sleeve used to fix the micro gas generator. . If a vehicle crashes and the seat belt pretensioner is triggered, the micro gas generator in the pretensioner may separate and enter the passenger compartment, increasing the risk of injury to the occupant; at the same time, the micro gas generator separation in the pretensioner Reducing the protective effect of pre-tightened seat belts on occupants has potential safety hazards.

Approach: Volvo Car Sales (Shanghai) Co., Ltd. will replace the third row of right-side seat belts for free in the recalled area to eliminate defects.

Imported 2005 RX-8

Starting recall time: July 24, 2017

Recall quantity: 361 vehicles

Recall vehicle production date: April 14, 2005 to February 15, 2008

Reason for recall: Some of the vehicles in this recall range have insufficient durability of the fuel supply tube of the fuel pump. After being affected by the internal fuel pressure and the heat generated by the engine and the exhaust pipe, the supply pipe will be degraded. Continuing use in this case may result in increased deterioration of the supply pipe, cracks, and oil leakage. In some cases, a fire may occur and there is a safety hazard.

Solution: Mazda (China) Enterprise Management Co., Ltd. will replace the new fuel filter assembly (containing the fuel supply pipe) for the vehicles within the recall scope free of charge to eliminate defects.

2007-2012 imports of Outlander EX Jin Jie

Starting recall time: July 27, 2017

Recall quantity: 54672 vehicles

Recall vehicle production date: November 23, 2006 to September 27, 2012

Reason for recall: Due to the design reason, some of the vehicles in the recall range will invade from the joints of the wiper motor and the wiper linkage, and abnormal wear will occur inside the joint, which may cause the front windshield wiper to malfunction and affect the forward vision. There are security risks.

Solution: Mitsubishi Motors Sales (China) Co., Ltd. will replace the improved wiper linkage assembly free of charge for the vehicles within the recall scope (an additional waterproof sleeve is attached to the connecting rod rubber sleeve and fixed with a strap).

Imported 2013-2014 Kia ​​Sorento Series

Start recall time: July 31, 2017

The number of recalled 5736 vehicles

Recall vehicle production date: December 18, 2012 to October 31, 2013

Recall reason: Some vehicles in this recall area have poor removal of machining burrs due to crankshaft cross-over oil holes. Metal debris impedes the flow of oil to the main bearings, causing the bearings to be insufficiently lubricated, and the bearings accelerating their aging. As a result, internal cylinders may periodically generate periodic knocks. The sound, engine fault light, and oil warning light will light up. After a long time of use, the bearing may be stuck and the vehicle may lose power, causing potential safety hazards.

Solution: Hyundai Motor (China) Investment Co., Ltd. will inspect the engine of the vehicle in the recall range and replace the engine's long cylinder for free if necessary to eliminate defects.

Imported 2014-2016 Outlander

Starting recall time: September 15, 2017

Recall quantity: 17,678 vehicles

Recall vehicle production date: April 23, 2015 to March 15, 2016

Reasons for recall: Some vehicles in the recalled area have caused some parts of the vehicle door locks to fail to meet specifications because of suppliers' manufacturing reasons. When the temperature rises, the locking part will be stuck, resulting in the door lock cannot be locked. In serious situations, the vehicle door may open during driving, and there is a potential safety hazard.

Measures: Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles in the recall range and replace the door locks for free to eliminate defects.

Imported BMW X5 and X6 2010-2013

Start recall time: November 1, 2017

Number of recalls: 86,778 vehicles

Production date of recalled vehicles: Imported 2010-2013 model X5 production date from April 5, 2010 to April 22, 2013, a total of 57,371 vehicles; imported 2010-2013 model X6 production date from April 5, 2010 to On April 22, 2013, there were 29,407 vehicles.

Reason for recall: Due to suppliers' manufacturing reasons, some of the vehicles in the recalled area may have the oil seal of the front drive shaft bearing slide out of the design position after long-term use, making the bearing vulnerable to external water and sediment and causing wear. After the bearing wears for a long time, there may be a seizure at ten bytes of the drive shaft, and it may cause abnormal vibration or abnormal sound of the drive shaft when the vehicle is running. In some cases, breakage may occur at ten bytes of the drive shaft, and the front wheels of the vehicle lose their driving force, causing potential safety hazards.

Solution: BMW (China) Automobile Trading Co., Ltd. will replace the front driveshaft for the vehicles in the recall area free of charge to eliminate defects.