We have the following type of high speed machines: KS140H, KS170H, KS270H,KS360H.
All-digital control system uses dedicated controller, multiple CPU processing division,
FEATURES
- A variety of text can be switched.
High Speed Injection Molding Machine High Speed Injection Molding Machine, Plastic Injection Machine, Thin Wall Injection Molding Ningbo Konger Machinery Co., Ltd. , http://www.kongerchina.com
High-low temperature wet heat transfer box control system:
Temperature and humidity display control instrument adopts (Japan) touch screen operation is simple, no key input, accuracy: 0.1 °C (display range), resolution: ± 0.1 °C; with automatic calculation function, can immediately change the temperature and humidity conditions to make temperature The humidity control is more accurate and stable. The controller operation interface is set in Chinese or English. The real-time operation curve can be displayed on the screen. It has 100 groups of programs, 100 sections of each group, each section can be recycled 999 steps of capacity, each time setting The maximum value is 99 hours and 59 minutes. After the data and test conditions are input, the controller has a screen lock function to avoid human touch and stop. It has an RS-232 or RS-485 communication interface and can be programmed on a computer to monitor the test process. Functions such as automatic switch, data, etc. The controller has a screen automatic screen saver function. In operation or setting, if an error occurs, it will provide a warning code.
2. Clean the condenser once every 3 months: For air-cooled cooling of the compressor, periodically check the condenser fan and decontaminate the condenser to ensure good ventilation and heat transfer performance; use water-cooled cooling for the compressor. In addition to ensuring that the inlet pressure and inlet water temperature, it must also ensure that the corresponding flow. And the condenser internal cleaning and descaling regularly to obtain its continuous heat transfer performance.
3, waterway and humidifier cleaning: If the water is not smooth, humidifier scaling easily lead to humidifier dry, may damage the humidifier, so you must regularly clean the waterway and humidifier.
4. Adhere to the professional management of special personnel, and qualified entities should send personnel to the supplier factory for training and study from time to time to obtain more professional maintenance and repair experience and capabilities.
5, high temperature and humidity heat transfer tank circulating fan, condenser fan cleaning and balance: similar to the cleaning evaporator, due to the different working environment of the test chamber, circulating fan and condenser fan will be condensed on a lot of dust and other small particles , should be cleaned regularly.
6, regular cleaning evaporator: due to the different levels of cleanness of the sample, under the action of the forced circulation of the evaporator will condense a lot of dust and other small particles, should be cleaned regularly.
7. The high-low temperature heat and humidity heat transfer box insists that the temperature be set near the ambient temperature after each test, and then cut off the power after about 30 minutes of operation, and clean the inner wall of the work chamber.
a multi-functional automatic fault detection, alarm system, certificates 99 mold of
processing procedures, with remote control interface. System is of high stability and
responsiveness. System uses color LCD, man made interface for easy operation and
with a number of peripheral interfaces.
- Manual, semi-automatic and fully automatic mode.
- To provide EUROMAP robot interface.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement
High and low temperature heat and heat transfer box maintenance method
1. The high-low temperature heat-and-humidity heat exchange box is generally high. We recommend that it be placed in a relatively benign temperature environment. Our experience temperature value is 8°C~23°C. For laboratories that do not have this condition, it must be equipped with appropriate Air conditioner or cooling tower.