A coffee grinder with a cone-knife grinder places a conical knife disk at the bottom of the machine, and then cooperates with the outer ring knife disk for grinding. The coffee powder produced in this way will be closer to granular, and at the same time, the water absorption path of the coffee particles will become longer, and it will take more time for the inside to contact the water, which will result in the coffee powder being released within the first time. The soluble substances are less, and the concentration will not be too high in a short time. Conical Coffee Grinder,Conical Burr Coffee Grinder,Small Conical Burr Coffee Grinder,Brim Burr Coffee Grinder Zhongshan Dippers Electric Co., Ltd. , https://www.cndippers.com
The types of imported electromechanical complete sets of equipment were mainly textile printing and dyeing machinery, machine tools and IT equipment. Among them, textile printing and dyeing machinery showed a substantial increase, with batches and amounts increasing by 13% and 77% respectively over the previous year. This is due to the rapid development of private textile enterprises in Wujiang in 2007, which have introduced advanced, high-value air-jet looms and spinning production equipment from Japan, Germany, and South Korea.
According to the analysis, unqualified complete sets of equipment mainly involve six reasons including safety, environmental protection, shortage of quantity, and intrinsic quality defects of the equipment. Then, how should companies import electromechanical complete sets of equipment to avoid these risks? The industry believes that the import of complete sets of electromechanical equipment companies should pay attention to three aspects: First, we need to understand China's mandatory standards for the equipment, including mechanical safety, electrical safety requirements, especially with the importer is not the same as the requirements Where the company must inform the other manufacturers before importing complete sets of equipment. The second is to increase the "self-protection" clause in the trade contract, write the quality and safety requirements into the contract or letter of credit, and set out the responsibility of the claim in order to facilitate the handling of subsequent problems. Third, for statutory inspections of imported mechanical and electrical products, enterprises should notify the inspection and quarantine bureau personnel to go to the site to inspect the imported mechanical and electrical products before they are unpacked; if the inspection and quarantine personnel agree to decommission the box by themselves, if there is a shortage of quantity or quality and safety The problem immediately ceased to be unpacked and sealed, and reported to the inspection and quarantine bureau.
Enterprises should pay attention to three issues when avoiding the risk of imported equipment
According to statistics, a total of 10,953 batches of electromechanical products were imported from Wujiang, Jiangsu Province in 2007, with a value of 963.85 million US dollars, an increase of 2.37% and 12.42% respectively compared with 2006. The Wujiang Entry-Exit Inspection and Quarantine Bureau carried out lots and lots inspections on key imported electromechanical complete sets of equipment. The total number of imported equipment was 1,852, and the number was 13,142 sets (sets). The value of goods was 575 million U.S. dollars. 23 batches of unqualified batches were found, and the number was 1483. (sets), the value of 21.55 million US dollars, the number of unqualified samples accounted for more than 10%.
Next Article
Security Explosives & Drug Detector HD300
Prev Article
Metal Detector Machine