Hot Sale Ce Wood Chipping Machine Price

Application

A tree chipper or woodchipper is a machine used for reducing wood (generally tree limbs or trunks) into smaller woodchips. They are often portable, being mounted on wheels on frames suitable for towing behind a truck or van. Power is generally provided by an internal combustion engine from 3 horsepower (2.2 kW) to 1,000 horsepower (750 kW). There are also high power chipper models mounted on trucks and powered by a separate engine. These models usually also have a hydraulic crane.

Tree chippers are typically made of a hopper with a collar, the chipper mechanism itself, and an optional collection bin for the chips. A tree limb is inserted into the hopper (the collar serving as a partial safety mechanism to keep human body parts away from the chipping blades) and started into the chipping mechanism. The chips exit through a chute and can be directed into a truck-mounted container or onto the ground. Typical output is chips on the order of 1 inch (2.5 cm) to 2 inches (5.1 cm) across in size. The resulting wood chips have various uses such as being spread as a ground cover or being fed into a digester during papermaking.Most woodchippers rely on energy stored in a heavy flywheel to do their work (although some use drums). 

Raw material 
Pine wood, weed tree wood, poplar wood, fir wood, slab, veneer, bamboo, corm stalk, cotton, reeds and other non-wood fiber rod materials.

 

Product Advantage

1.Advanced structure, high quality cutting chippers, wide scope of application, simple operation, easy maintenance;

2.Wear-resistant sharp alloy tool, reliable advanced and to enhance its service life;

3.Wearing parts low-consumption, low running cost.


Specification

Customer Visit

Company History









After-sales team





 

Application

A tree chipper or woodchipper is a machine used for reducing wood (generally tree limbs or trunks) into smaller woodchips. They are often portable, being mounted on wheels on frames suitable for towing behind a truck or van. Power is generally provided by an internal combustion engine from 3 horsepower (2.2 kW) to 1,000 horsepower (750 kW). There are also high power chipper models mounted on trucks and powered by a separate engine. These models usually also have a hydraulic crane.

Tree chippers are typically made of a hopper with a collar, the chipper mechanism itself, and an optional collection bin for the chips. A tree limb is inserted into the hopper (the collar serving as a partial safety mechanism to keep human body parts away from the chipping blades) and started into the chipping mechanism. The chips exit through a chute and can be directed into a truck-mounted container or onto the ground. Typical output is chips on the order of 1 inch (2.5 cm) to 2 inches (5.1 cm) across in size. The resulting wood chips have various uses such as being spread as a ground cover or being fed into a digester during papermaking.Most woodchippers rely on energy stored in a heavy flywheel to do their work (although some use drums). 

Raw material 
Pine wood, weed tree wood, poplar wood, fir wood, slab, veneer, bamboo, corm stalk, cotton, reeds and other non-wood fiber rod materials.

 

Product Advantage

1.Advanced structure, high quality cutting chippers, wide scope of application, simple operation, easy maintenance;

2.Wear-resistant sharp alloy tool, reliable advanced and to enhance its service life;

3.Wearing parts low-consumption, low running cost.


Specification

Customer Visit

Company History









After-sales team





 

Percussion Drilling Rig

Percussion drilling is employed when auger or wash boring is not possible in very stiff soil or rock. It also can be used in most soil types.

Here the advancement of a hole is achieved by alternatively lifting and dropping a heavy cutting or hammering bit that is attached to a rope or cable that is lowered into an open hole or inside a temporary casing (casings are hollow cylindrical pipes used for borehole stability and to prevent the loss of drilling fluid through the boreholes).

Usually a tripod is used to support the cable. The stroke of bit varies according to the ground condition. The major disadvantage of this method is that it is not possible to get good-quality undisturbed samples. In very hard rock (and especially fractured hard rock), down-the-hole (DTH) drilling can be employed. In this case the hammer, applying repeated percussive pressure, is located just behind the drill bit inside the hole, unlike the open percussion drilling, where the hammer is on top of the drilling string.

The drilling string provides the necessary force and rotation to the hammer and bit, as well as compressed air or fluids to the hammer and for the flushing of cuttings.

This arrangement also allows for much deeper percussion drilling. However, the DTH drills are typically more expensive.

Percussion Drilling Rig,Cable Percussion Drilling,Percussion Drilling Equipment,Deep Foundation Engineering Percussion Rig

Henan YK Prospecting Machinery Co., Ltd , https://www.yikyuirig.com