MZF - One side open dense woven textile sleeve made by Polyester monofilament and cotton yarn, It has fire resistance, wear resistance, softness, dustproof, quick and easy to operate and other characteristics. the one side Open structure is good to protect refit, reassembly maintenance and overhaul for inner wiring harness.
ZSC- Self wraped braided sleeve is a new kind Wire Protection Sleeve, braided by polyester monofilament and polyester multifilament. Self wrap Braided Sleeve has good heat dispersion performance, fireproofing, Abrasion resistance, easy to operate, Open structure is good for wire harness to install, maintain and repair.
LN-BZW Zip Expansive Braided sleeves Made of polyester monolayer woven and add the zipper stitching. Zipper woven sleeve with good heat dissipation, scalability, fire resistance, wear resistance, easy to operate and other characteristics. Manages cables between worksurface and power location Designed for vertical cable management. The zipper structure is good for internal harness protection and reassembly.
MST-PB Velcro shielding sleeve made by the composite of tinned copper hook wire, fire retardant cloth and magic tape, has the effects of shielding high sensitive electromagnetic interference, reducing noise, dust prevention and earth leakage protection.
ZIP-PB Zipper Design EMI Shielding Sleeve made of the recombination of tinned copper hook silk net,flame retardant cloth and zipper. Has the characteristics of shielding High sensitive electromagnetic interference, noise-reduction, dust proof and abrasion resistance.With the zipper design, it`s easy for installation and removal, convenient to use.
MST-BZ Velcro Polyester Expandable Braided Sleeve is seamed by polyester monofilament and Adhesive type expansion casing made of polyester monofilament and self-adhesive tape (Velcro) . Product has good heat dispersion, abrasion resistance, simple operation and other characteristics.
AKP -PVC Material And Locking Buckle Sleeving (AKP- Buckle Sleeve ) is made by PVC material and locking buckle, which can be used for electric
wire and cables for neatening and beautifying. the product can be used repeatedly, and has excellent insulation effect, good flame retardancy. It`s good to be used to modify the wire line and reinstall for the multi-strand wire harnesses. And easy to maintain and service.
AKP-S /PVC Button Aluminum Foil Cable Shielding Sleeve , PVC Button Aluminum Foil Cable Signal Shielding Sleeve is made by PVC material and aluminum foil, which can be used for electric wire and cables for neatening, beautifying and EMI shielding. the product can be used repeatedly, and has excellent insulation effect, good flame retardancy. It`s good to be used to modify the wire line and reinstall for the multi-strand wire harnesses. And easy to maintain and service.
Self wraped braided sleeve,One Side Open Braided Sleeve,Zipper braided sleeve, Velcro textile sleeve,Velcro braided sleeve,PVC Protective Buckle Sleeve,Velcro Shielding Sleeve KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com
Application:
PVC Plastic pipe making machine is mainly used in the production of Agricultural water supply & water discharge system, architectural water supply & discharge system, wire laying system, etc. purposes.Â
The unit consists of Conical (Parallel) double screw extruder-PVC pipe mold-Vacuum forming tank-Haul-off machine-Cutting machine-Stacker/Belling machine.Â
Producing pipe diameter range: Φ16mm-Φ630mm.
And the line can be equipped with Comptroller thickening instrument or computer ink-jet printer, etc. to achieve the production and manufacture of high-grade tubing.
Advantages:
1. Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guarantee perfect solution;
2. Spider type die head can reduce joint line of the melt material, with reasonable compression ratio design;
3. Vertical integrated structured gear box with adopts NSK/SKF bearings guarantee stable operation and long uselife;
4. Vacuum calibration tank adopts high-efficiency two chamber and large length design, providing faster calibration and more efficient cooling;
5. Planetary cutter adopts hydraulic feeding of blade which providing perfect chamfering processing and cutting surface;
6. U type, R type and Air blow type socket can be provided according to applications;
7. Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently.
Work flow and detailed information :
Feeder
- To feed material into extruder;
Extruder
- World famous brand electrical component such as Siemens,Schneider, ABB etc;
- High torque gearbox with adopts NSK/SKF bearing;
- Siemens/WEG original motor achieved global after service;
- Bimetallic screw and barrel;
- Intelligent PLC controlling system with human-friendly interface.Â
Die head
-Â High melt homogenity
-Â Low pressure built up even with high outputs
-Â Melt channel distribution system
-Â Equipped with seramic heaters
-Â Pipe head carriage for easy movement
-Â Easy maintenance thanks to the optimized and proven designed construction.
Vacuum calibration tank
-Â 304 stainless steel with painted outer surface
-Â Special water sprays are located on the best position for cooling the pipe efficiently
-Â Special and easy adjusted pipe supports for each pipe diameter
-Â Installed vacuum and water pumps can work without any maintenance for long times
-Â Special cooling baths can be designed for specific extrusion production
Haul off
- Upper and lower caterpillar is driven separately by the frequency inverter
- Fast change type pads
Planetary cutter
-Â Automatic synchronisation with extrusion speed
-Â Planetary equipped with disk and milling cutter for cut and chamfering
-Â Touch screen control panel
-Â User friendly software developed by Aceextech
-Â All movements are motorised and controlled by control panel
-Â Pipe blocking vices device
-Â Type of the cutting unit is chose depend on pipe.
-Â Less maintenance needs.
-Â Completely closed and secured machine for maximum safety.
Belling machine
-Â Socket forming: smooth (solvent cemented)
-Â Socket forming: shaped for insertion of rubber gasket (blowing system)
-Â Socket forming: collapsible system
-Â Socket forming: auto-load rubber gasket
-Â Touch screen control panel
-Â User friendly software developed
-Â Automatic synchronisation with extrusion speed
-Â Pneumatic, hydraulic and motorized movements.
-Â High quality belling tools.
Stacker
- Stainless steel 304 as touching material
- Discharge driving by air cylinder
Technical Parameter:
Diameter ranges(mm)
Extruder model
Max. Capacity(kg/h)
Max. lineal speed(m/min)
Extruder motor power(kw)
16-32 (4-cavities)
ACE65/132
300
10*4
37
20-63Â (Dual)
ACE65/132
300
15*2
37
50-160
ACE65/132
300
8
37
75-250
ACE80/156
500
6
55
110-315
ACE80/156
500
4
55
75-160 (Dual)
ACE92/188
850
6
110
315-630
ACE92/188
850
1.2
110
Technical Parameter of Main extruder:
Model
Power
(kw)Screw Diameter (mm)
Screw Qty.
Designed Output (kg/h)
Dimension(L*W*H)
(mm)
ACE-45/90
15
Φ45/90
2
70
3360x1290x2127
ACE-51/105
18.5
Φ51/105
2
100
3360x1290x2127
ACE-55/110
22
Φ55/110
2
150
3620x1050x2157
ACE-65/132
37
Φ65/132
2
300
3715x1520x2450
ACE-80/156
55
Φ80/156
2
400
4750x1550x2460
ACE-92/188
110
Φ92/188
2
750
6725x1550x2814
 Main components:Â
-Â Motor:Â Siemens, WEG, SEW
-Â Gear reducer:Â SEW, FALK
-Â Bearing:Â SKF, FAG, NSK
-Â Air cylinder:Â Festo, SMC, AirTac
-Â PLC interface and module:Â Siemens, Schneider, Beckhoff
-Â Frequency inverter:Â ABB, Schneider, Siemens
-Â Servo motor:Â Lenze, Delta
-Â Pressure sensor:Â Dynisco, Gefran
-Â Low voltage component:Â Siemens, Schneider, Omron, LS
-Â Temperature controller:Â Omron, RKC
-Â Solid state relay:Â Crydom, Celduc
About ACEEXTECH:
ACEEXTECH is a creative company, focusing on R & D of plastic extrusion system, and providing the equipments and solutions for plastic pipe, profile, tile, sheet and board.
ACEEXTECH products fulfill the needs of users in a very direct way due to over 25 years of knowledge and experience in plastic extrusion field, which also helps us to contribute actively to the success of customers by offering sustainable solutions that meet industry needs.   Â
ACEEXTECH offers a complete portfolio of support and consulting services all the time, from project engineering to custom financing solutions, after sales service at its best, ongoing production optimization, training and advisory services, even end product development.
Â
Why ACEEXTECH:
-Â Specialized RÂ & DÂ team involved in plastic extrusion industries over 25years.
-Â Ability to provide the customized plastic extrusion solutions.
PVC Twin Pipe Extruder Machine
Model NO.: ACE-65/132-80/156-92/188
Motor Brand: Siemens,Weg,Sew
Gearbox: Vertical Type Sew/ Falk Brand
Inverter: ABB/Schneider/Siemens
Bearing: SKF,NSK
Barrel & Screw Material: Bimetallic Barrel & Screw
Output Capacity: 700kg/H
Raw Material: UPVC/CPVC/PVC Powder
Trademark: ACEEXTECH
Transport Package: Wooden Pallets
Specification: PVC pipe extrusion machine cost
Origin: China
HS Code: 8477209000
Model NO.: ACE-65/132-80/156-92/188
Motor Brand: Siemens,Weg,Sew
Gearbox: Vertical Type Sew/ Falk Brand
Inverter: ABB/Schneider/Siemens
Bearing: SKF,NSK
Barrel & Screw Material: Bimetallic Barrel & Screw
Output Capacity: 700kg/H
Raw Material: UPVC/CPVC/PVC Powder
Trademark: ACEEXTECH
Transport Package: Wooden Pallets
Specification: PVC pipe extrusion machine cost
Origin: China
HS Code: 8477209000
PVC twin pipe extruder machine
Next Article
Airport X-ray Screening Security Equipment