Floating Pneumatic Marine Rubber Fender Supplier

Floating Pneumatic Marine Rubber Fender Supplier

Model NO.: Yokohama-Type, Net-Type, Sling-Type
Capability: Water Rubber Hose
Load Capacity: >8000teu
Usage: Trade, Ship Launching, Protection, Ship Docking
Trademark: Star-Marine
Specification: 0.5m*1.0m-4.5*12m
HS Code: 40169400
1. Primary business:
 
ZHENJIANG STAR GROUP mainly produce: 
 
  • Yokohama type fender net type
  • Sling pneumatic rubber fender
  • Ribbed pneumatic rubber fender
Certificate: ABS, LR, BV, NK, DNV, RINA, RS, IRS,CCS etc.

Floating pneumatic rubber fender, Yokohama fender, ship airbags,Super cell fenders (SC type), Cone fenders, Super Arch fenders (type SA), Cylindrecal fenders (Type Y), Semi-circular fenders (Type D), Type GD fenders, Type I fenders, Type U fenders,Turn cell fenders, Type π rubber fenders, Rubber ladder, Rubber fenders for tug boats, PVC yacht fenders etc.
 
We have 15 years experience in rubber fender production and our customers include:

 Mearsk , MSC, COSCO, CMACGM, OOCL, APL, NYK , NEW YORK port, KOBE port, YOKOHAMA port, Singapore port, ANTWERP port, LONDON port, HAMBURG port, DUBAI port, QINGDAO port, SHANGHAI port etc.
 

2.Product description:

Penumatic rubber fender with chain protection

(1) High energy absorption

The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Our ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.


(2) Ultra low back pressure
The inside air of  pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of sea inflatable fender, its adaptability is much higher than other fender.
 

(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
 

Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.

(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.

 Fender performance specification   

 
Size  Initial internal pressure Guaranteed energy absorption
                 GEA(kJ) 		Reaction force at GEA deflection
                       R((kN))
D×L(m) (Kpa) Minimum value at deflection
60±5% 		Tolerance ±10%
0.5×1.0 50 6 64
0.6×1.0 50 8 74
0.7×1.5 50 17 137
1.0×1.5 50 32 182
1.0×2.0 50 45 257
1.2×2.0 50 63 297
1.35×2.5 50 102 427
1.5×3.0 50 153 597
1.7×3.0 50 191 639
2.0×3.5 50 308 875
2.5×4.0 50 663 1381
2.5×5.5 50 943 2019
3.0×5.0 50 1210 2104
3.0×6.0 50 1485 2583
3.3×4.5 50 1175 1884
3.3×6.0 50 1675 2783
3.3×6.5 50 1814 3015
3.3×10.6 50 3067 5257
4.5×9.0 50 4752 5747
4.5×12.0 50 6473 7984
 Floating Pneumatic Marine Rubber Fender Supplier
Floating Pneumatic Marine Rubber Fender Supplier

Look to LianJiu for a Ball Valve selection that can handle pressures up to 700 bars and temperatures to 400°F. As a type of quarter-turn valve, ball valves can shut off liquid flow from a pipe. An attached lever helps allow a spherical port to reopen flow and shut it off again. By selecting your ball valve according to how the casing around the ball is manufactured and assembled, you can direct flows in multiple directions, such as with a three-way ball valve. You also can accommodate consistently high-pressure applications with a trunnion ball valve with durable anchor points around the ball. Shop Grainger today.
LJ90 Series unibody economy ball valves are a great choice for lower pressure general hydraulic and petroleum shut-off needs. Valves are unibody bar stock construction with phosphate-coated bodies and NPT threaded connections in a reduced port design. Built strong and designed to last longer than lightweight imports. 

Key Benefits:
Unibody Construction
Blowout-Proof Stem Design
RTFE Seats and Seals
Options:
Stainless Steel Ball and Stem (OA)
Latching Lockout Handle Kit (OP)
[Gull Wing" Tee Handle (OE)
Oval Handle (OQ)

Carbon Steel Ball Valves

Carbon Steel Ball Valve,Carbon Steel Valves,Carbon Manual Ball Valves,Carbon Ball Valves

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com

Next Article
Prev Article