Cars should pay attention to the process of wading

Car wading is not a regular problem, but each driver must have this wading experience. When the summer rain season arrives, a large flood of water will appear on the surface of a large flood, if it can avoid wading Should choose to change the driving route, but in the case of a last resort only can choose to wading, then after the car wading need to repair and maintain the car in a timely manner. However, there are many people who have such a question: What should you watch out for when driving in a car? If the car does not automatically switch off during wading, do you still need to maintain it?

After the car wading, it was found that there were no obstacles. When there was no automatic flameout during the wading, the car was no longer maintained and inspected. This is a misconception. The so-called wading means that when the water level has reached two-thirds of the vehicle's bumper and tires, this is a wading condition. In this case, inspection and maintenance are required regardless of whether the vehicle is faulty. The specific safe operation procedures for the wading process of the automobile are as follows:

1. When the car encounters must wading, it should be observed in time. If the water level reaches the position, if it has reached two-thirds of the bumper or the tire, it means that the driving will have a certain degree of danger. First, it must be decelerated. If the speed is too high, the amount of water passing through the vehicle will increase, and rain will be allowed to enter the cab through the cabin or chassis. In order not to face the vehicle traveling across from the opposite side, it should be avoided in time.

2, the car wading process to ensure that the low-speed driving, should be done without stopping without shifting without oil does not accelerate, generally should be in the low-grade high oil uniform driving, with particular attention is not to splash big splashes.

3. If the vehicle automatically shuts off during the wading process, it cannot be restarted immediately. The ignition switch should be turned off. Drag the car to the wading place and check if the engine has water. If the water has already entered the valve from the air filter, it will pass through the trachea. Into the cylinder, at this time can not start motoring, which will cause the engine's crankshaft and even Xuan and other parts of the deformation. Automatic engine shutoff in water is most likely to enter the water and can only be repaired by a neutral trailer to a garage.

CNC Turned Components manufacture from various materials like stainless steel, aluminium, carbon steel & copper alloy etc. CNC Turned Parts offered by our company possess high degree of accuracy and repeatability. We are well equipped with innovative technology for the products of excellent quality parts for various industries for their various features and wide application area.

Cnc Turning Mold Parts

Cnc Turning Mold Parts,Cnc Turning Mould Parts,Customized Cnc Turning Mold Parts

Changsha Borun Mould Co. Ltd. , http://www.borunmouldparts.com