Chu Sheng tanker operation specification

As a dangerous goods vehicle, Chusheng tank trucks should have a complete set of operating rules to prevent dangerous situations. In the event of a dangerous situation, it should also be handled in accordance with the operating rules, and only in this way can the loss be reduced to a minimum. What operating practices are required for Chusheng tank trucks , and the following content is a reference for everyone.

When storing the vehicle, the vehicle should be parked in a special carport, and the carport should be far away from the fire source, set a clear fire-fighting sign, be equipped with fire-fighting equipment, and the fire-extinguishing equipment should be checked whether it is within the warranty period. When the tanker is driving, it must be strictly within the safe speed, avoid other vehicles, choose a good driving route, and stay away from the open flame. Lightning lightning weather should pay attention to lightning protection and high-voltage lines. It is strictly forbidden to drive during the driving process, open the gas tanker, etc. to avoid dangerous situations. All electrical devices in the vehicle must have good insulation. Vehicle work lighting should be a safety light of 36V or less.  

In particular seasons should pay attention to the details, summer should pay attention to sun protection, more than a certain temperature is prohibited to travel outside, to regularly check the safety valve and high pressure valve. In winter, when the oil pipeline is frozen, it is strictly forbidden to bake with an open flame and to freeze it with a barbecue. Dongfeng 5-6 tons of refueling trucks must implement special personnel management measures, without permission, can not use the tanker refueling vehicles, violations shall be investigated. In the process of inspection and repair, if the operator needs to enter the oil tank to carry out operations, it is strictly prohibited to carry the fire, and there must be reliable safety protection measures. There must be professionals outside the tank to monitor.

Chu Sheng tanker tank oil hole should be tightly sealed, drain valve, drain pipe should be no leakage, the tank vent should be open, the oil pump inlet filter should be frequently cleaned, send oil hose should be installed immediately after use The joint cover on both ends shall not allow dirt to enter. After the completion of refueling and unloading, it is necessary to check carefully whether there are oil leakage or oil dripping in each valve and interface. After the Chusheng tanker is used, it is necessary to ensure that the vehicle and the parking position are safe before leaving.

Tungsten Carbide Nozzle is made by the precision machining with the tungsten carbide materials (super hard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N. We Zhengtong Factory offer Sand Blasting Nozzle,Boron Carbide Sand Blast Nozzle, Sand Blast Nozzle,Water SprayNozzle,Tungsten Orifice Flow Nozzle-etc.

In terms of service life, boron Carbide Nozzle has the longest service life. Such as forsandblasting and shot peening.Boron carbide costs more but will outlast tungsten carbide by 3 to 10times.

Carbide Nozzle

Carbide Nozzle,Carbide Sandblasting Nozzle,Carbide Sandblast Nozzles,Tungsten Carbide Sandblast Nozzle

Zhengtong Special Material Factory Hi&New Tech Zone Chengdu , https://www.ztferre.com