The LED outdoor mobile advertising vehicle engine is an integral part of several large components for the entire vehicle. As long as the engine of the LED outdoor mobile advertising vehicle has malfunctioned, the entire vehicle can only be in situ. Moved. And the engine's failure will also bring great hidden danger to the driver's life safety. Therefore, when the LED advertising vehicle is under maintenance, special attention must be paid to the maintenance of the LED outdoor advertising vehicle engine. Good protection can not only provide a good driving environment for the vehicle, but also a great protection. Then, when it comes to maintaining and maintaining the LED outdoor outdoor advertising vehicle engine, what are the mistaken maintenance methods? 1, LED outdoor advertising vehicle thermostat is also a valve inside the engine to control the coolant flow path, but also can be a very good automatic control temperature regulator. When the temperature of LED outdoor outdoor advertising vehicle engine is too high, the driver will arbitrarily remove the thermostat. At this time, the coolant in the engine of the LED outdoor mobile advertising vehicle can only be recycled. , and will also lose the cooling effect. 2. Some LED outdoor mobile advertising drivers will think that the vehicle's engine is not so fragile, and the higher and lower temperatures are not harmful. actually not. When the LED outdoor mobile advertising vehicle operates at a low temperature, it will have a great influence on the use performance of the LED advertising vehicle. And it will be accompanied by increased fuel consumption, reduced power, and accelerated wear. 3. Compared with the LED outdoor mobile advertising vehicles, the habit of using some of the habits in life and people, the belt on the person's body, if it is too tight, it will make people not breathe smoothly, it will not be comfortable. The LED outdoor advertising vehicle belt is almost the same meaning, not the more compact the belt in the vehicle engine, the better and more secure, when the belt is in a tight state for a long time, not only will reduce The service life of LED outdoor advertising vehicle belts will also be broken, so the tightness of LED advertising vehicle belts must meet the relevant technical requirements. Calstar® Solvent Recovery Machine Recyclable: washing solvent, acetic acid esters, halogenated hydrocarbons, three ethyl chloride, trichloroethylene, solvent oil, isopropyl alcohol, acetone, butanone and cyclohexanone, days that water, wash water gun, banana water, plate washer water, wash water network, wash water, white oil, hand washing water, diluent, washing water, ink cleaning agent, ethyl acetate, toluene, xylene, toluene three, four toluene, banana water, alcohol, ethanol, butanol, two glycol solvent waste and dirty etc.. Isopropyl Alcohol Recycling Machine Isopropyl Alcohol Recycling Machine,Waste Methyl Acetate Recovery Machine,Isopropyl Alcohol Recycling Unit,Waste Isopropyl Alcohol Recovery Unit SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com
Calstar® solvent Recovery Machine using the distillation principle: by heating the evaporation of solvent into a gaseous state, the steam into the cooling system to flow out, so that the recovery of organic solvents. So as to make the waste, dirty, old organic solvent recycling, recycling and reuse. Both can save a lot of procurement costs, but also to reduce the pollution of the environment.
Cleaning Agent Recovery Machine,Recyclable solvent,Recoverable solvent species
Led outdoor mobile advertising vehicle maintenance engine can not make mistakes