Transportation, corporate production, logistics, transportation, agriculture, fishery, and other industries are all dependent on gasoline. After increasing the use of oil in various industries, the use of oil tankers has also gradually increased. Through tankers can help people complete the transport of gasoline. . Since the tanker transports dangerous goods, it is necessary to master the safety during the operation to avoid erroneous operation and dangerous accidents. Then, what is the operation process of the small tanker? The small series introduces you to the specific process. Small tanker operation process: 1. Small tank trucks should not be parked on slopes. It is necessary to place triangular wooden wedges under the tires when parking on slopes, and use different gears according to the difference between the upper slope and the lower slope. 2. The driver of a small tanker vehicle must have an employment permit and be skilled in driving open the tanker. He cannot load other items in the state of transport operations. 3. Any oil from a small tanker should be sealed and there should be no leakage; for the oil filter, the oil filter should be cleaned regularly. Every time it is used, it should be cleaned once; The air inlet and outlet are unobstructed and there is no blockage. 4. Small tank trucks may encounter fire conditions, so they must be equipped with special fire extinguishers for emergency use. 5, small tanker should be installed a drag subway chain, and driving the process to put down the subway chain to ensure that it can touch the ground. 6. A small tanker should have an exhaust pipe. Install the exhaust pipe in the first half of the vehicle as much as possible, and make sure that it is not tempered. 7. Persons driving small tank trucks should not bring fire, they should not smoke during driving and near small oil tankers. At the same time, they should try to wear cloth shoes. Shoes with metal decorations cannot be worn. 8, the location of the park should be selected, can not be placed under a fire, under a tree, high-voltage lines and other dangerous places. What is the operation procedure of the small tanker? When driving a small tanker, it cannot be sloppy. No matter whether it is parking, driving, or operating, it needs to be operated in accordance with the relevant standards.
We are the only manufacturer for 5D Wheel Alignment. This wheel alignment is for all kinds of car lifts. 5D Wheel Alignment for Scissors Lift is our patented product. 5D Wheel Alignment For Scissors Lift is for all carshops with scissors lift and limited space. The wheel alignment is installed from ceiling. 5D wheel alignment for scissors lift has four cameras and each of them monitor each target, so the measurement result can be more precise than two cameras. Besides, the sight of cameras are bigger than traditional 3D Wheel Alignment. 5D wheel alignment for scissors lift can be used for vehicles with ultra-long wheelbase.
Advantages of Sucvary 5D Wheel Alignment:
1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.
2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.
3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.
4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.
5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.
6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.
7. The optional one point wheel clamps can be installed within four seconds.
5D Wheel Alignment for Scissors Lift 5D Wheel Alignment For Scissors Lift Shenzhen Sucvary Tech Co., Ltd. , https://www.syalignment.com
What is the operation procedure of the small tanker?