Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve

Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve

Model NO.: TPSBALLV007-2
Type: 3 Pieces
Function: Bypass-Valve
Temperature: <200deg
Application: Industrial Usage, Water Industrial Usage, Household Usage
Size: 1/2"-4"
Trademark: TOPLINE OR OEM
Specification: SGS
Origin: Wenzhou, Zhejiang
HS Code: 84818010
Model NO.: TPSBALLV007-2
Type: 3 Pieces
Function: Bypass-Valve
Temperature: <200deg
Application: Industrial Usage, Water Industrial Usage, Household Usage
Size: 1/2"-4"
Trademark: TOPLINE OR OEM
Specification: SGS
Origin: Wenzhou, Zhejiang
HS Code: 84818010
Sanitary Pneumatic Encapsulated Ball Valve
PTFE seat fully encapsulates the ball, ID Polished, Hygienic Standard
Adjustable stem packing
Available in SS304&316 body construction
Designed for easy actuator mounting
100% tested air under water at 100psi, open and closed
Positions
Dimension: 1/2"-4"
Materials: SS304&316L
End types: Tri-clamp&threaded, butt weld ends have extended tangents for orbital welding
Padlocking device

FAQ:
1.   Are you a trader or manufactor? 
      We are a manufactor

2.   Can your products reach to FDA , CE and 3A requirements?
      Yes, all of our material can reach to the requirements of FDA, CE and 3A

3.   How can you ensure the quality?
      We always take the Quality as the most important point during our business. So we have a formal regulation to control the quality, the procedure will be: A. The raw materials will be 100% inspected. we will ruturn to the supplier for any of poor raw materials. B. during production, different materials will be charged by different person to avoid any mixing. C. After production, we always inspect 50% for each lot. If there is any problem in the 50%, then we will go back to inspect 100%.  of course, if our customer have the special requirement to inspect 100%. We can do that as well.

4.   Can you supply the 3.1 Quality Certificate (including the chemical composition analysis resuls)?
      Yes, we inspect chemical composition for every lot of our material ,  and supply the record to issue the 3.1 Quality Certificate. If necessary, we can send the 3.1 Quality Certificate together with the shipping documents.

5.  How do you solve the quality Complaint, if any?
We are prety proud that we never let any customer leave us bcz the quality.   We'll do our best to supply the correct products, so we receive little quality complaint during our 15 years business.  If it is happend, we'll be responsible for it from the begining to the end.

6.   How long would be the delivery time?
Regarding the common products, 8-10 days will be enough; for bulk order, 15-25days is required.  It depends the order quantity

7.    Any further questions, pls feel free to let me know


Description		 Sanitary ball valves
Size 1/2"-4"
Material 304/316
End connection Weld/Tri-clamp/threaded
OEM OK

 
 
Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve
Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve
Sanitary Pneumatic Encapsulated Ball Valve
PTFE seat fully encapsulates the ball, ID Polished, Hygienic Standard
Adjustable stem packing
Available in SS304&316 body construction
Designed for easy actuator mounting
100% tested air under water at 100psi, open and closed
Positions
Dimension: 1/2"-4"
Materials: SS304&316L
End types: Tri-clamp&threaded, butt weld ends have extended tangents for orbital welding
Padlocking device

FAQ:
1.   Are you a trader or manufactor? 
      We are a manufactor

2.   Can your products reach to FDA , CE and 3A requirements?
      Yes, all of our material can reach to the requirements of FDA, CE and 3A

3.   How can you ensure the quality?
      We always take the Quality as the most important point during our business. So we have a formal regulation to control the quality, the procedure will be: A. The raw materials will be 100% inspected. we will ruturn to the supplier for any of poor raw materials. B. during production, different materials will be charged by different person to avoid any mixing. C. After production, we always inspect 50% for each lot. If there is any problem in the 50%, then we will go back to inspect 100%.  of course, if our customer have the special requirement to inspect 100%. We can do that as well.

4.   Can you supply the 3.1 Quality Certificate (including the chemical composition analysis resuls)?
      Yes, we inspect chemical composition for every lot of our material ,  and supply the record to issue the 3.1 Quality Certificate. If necessary, we can send the 3.1 Quality Certificate together with the shipping documents.

5.  How do you solve the quality Complaint, if any?
We are prety proud that we never let any customer leave us bcz the quality.   We'll do our best to supply the correct products, so we receive little quality complaint during our 15 years business.  If it is happend, we'll be responsible for it from the begining to the end.

6.   How long would be the delivery time?
Regarding the common products, 8-10 days will be enough; for bulk order, 15-25days is required.  It depends the order quantity

7.    Any further questions, pls feel free to let me know


Description		 Sanitary ball valves
Size 1/2"-4"
Material 304/316
End connection Weld/Tri-clamp/threaded
OEM OK

 
 
Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve
Stainless Steel Sanitary Pneumatic Ball Valve with Solenoid Valve

FeSi Inoculant

The aluminum content of 75 ferrosilicon is 1.5%, and the aluminum content of 72 ferrosilicon is 2%. Ferrosilicon inoculants are generally 0.2-0.8mm on-flow inoculants, with particle sizes of 1-3mm and 3-8mm.

Fesi Inoculant,Ferrosilicon Fesi Metal,Ferrosilicon Inoculant Addititive,Ferrosilicon Fesi Si Metal

ANYANG GUOQI SILICON INDUSTRY CO.,LTD , https://www.siliconxg.com

Next Article
Prev Article