There are two main types of marble veneers used in the construction industry, one with a thickness of 20mm, commonly referred to as a "standard plate" and the other with a thickness of 10mm, commonly referred to as a "thin plate", since the thin plate production line generally only produces widths at The specification plate below 400mm, so the thin plate production line is also called the small plate production line; correspondingly, the standard plate production line is also called the large plate production line. 2. Marble sheet processing process New Chemical Materials,Chemical Industry Raw Material,Chemicals Raw Materials,New Industrial Chemical Raw Materials Shandong YunFengLian Chemical Co.,Ltd , https://www.yfluorine.com
1. Marble standard plate processing process The crane is loaded on the block truck matched with the saw machine by the crane, transported to the working position of the diamond large saw or the large-diameter circular saw, fixed and cut into the wool board, and then gradually carried out. Cutting, grinding, polishing and other processing, and finally after inspection, packaging and delivery to the finished product. The processing flow can be divided into two types: 
[next]
The processing of marble sheets generally uses a thin plate automatic processing line. The blocks are hoisted and fixed on the electric block truck, and are fed into the two-way cutter by the guide rails to be cut into the wool board. The unloading machine, the conveying chute and the turning machine are automatically connected with each process, and the process is advanced and the efficiency is high.
Marble processing process