We are manufacture in Shenzhen China.
Do you want to own a unique T-shirt?
Do you want to DIY a T-shirt special for your kids, your lover and your family?
Do you want to open a workshop for the T-shirt printing business?
Imagination is unlimited; Gateway can give you a complete solution for customizing your t-shirts.
The operation is very simple; You just put the T-shirt on our t shirt jig/adapter.
T Shirt Printer,Digital T Shirt Printer,T Shirt Printing Machine,Black T Shirt Printer,A3 T Shirt Printer Shenzhen Refinecolor Technology Co., LTD. , https://www.szcoffeeprinter.com
　　
1, no water after start-up: there is air or water in the pump to accumulate gas, or the bottom valve is not strict irrigating water dissatisfaction, serious leakage of vacuum pump packing, sluice gate or beat the door closed lax.
　　
Exclusion: remove debris, replace the damaged rubber pad, change the direction of the valve; press or replace the new packing, close the gate valve or pat the door; increase the filling amount until the deflation plug does not bubble up; replace Cracked pipe; lower head, the pump nozzle into the submerged 0.5 meters.
　　
2, the pump does not turn when starting: the packing is too tight or clogged with debris between the impeller and the pump body, or the pump shaft, bearings, leakage ring rust live, or serious bending of the pump shaft.
　　
Exclusion: Loose packing, clear diversion trough; open the pump to remove debris, rust; remove the pump shaft to correct or replace the new pump shaft.
　　
3, the pump heat bearing damage: Rolling bearing or bracket cover gap is too small; shaft bending or two axes are not heart; tape too tight; lack of oil or poor oil quality; impeller balance hole clogging, impeller out of balance, increase The thrust to the side.
　　
Exclude: replace the bearing; remove the back cover, install the gasket between the bracket and the bearing seat; adjust the pump shaft or adjust the concentricity of the two shafts; adjust the tightness of the tape properly; add clean butter and butter to the bearing 60% of the gap; remove the blockage in the balance hole.
　　
4, after the start of traffic shortage: speed is not complete or belt slip, the speed is low; axial pump blade mounting angle is too small; lack of lift; suction stroke is high; the end of the valve, pipe and impeller partial blockage or impeller defect; Water leakage is serious.
　　
Exclude: restore the rated speed, remove the belt grease, adjust the belt tightness; adjust the blade angle, lower the pump installation location; sealed pump leak, compaction packing; remove clogs, replace the impeller; Department.
Name
T shirt printer
Print head
DX5
Printer size
33*43cm(33*60cm)
Printing speed
A4 photo/111s
Printng resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB2.0
Net weight/Gross weight
55Kg/60Kg
Printer size
750*630*510mm
Height adjustment
Automatic
Working power
110V/220V 50/60Hz 30-75W
Operation system
Windows 7/XP/2000/Vista etc
Temperature
5-35o
Brief description of drainage pump common faults and elimination
Urban Drainage Pumping Station is also the city's infrastructure. It is the forefront of sewage treatment. It pumps the collected sewage into the trapping pipeline by a pump and sends it to the sewage treatment plant for treatment and discharge to rivers and rivers. During this process, In the water pump, gate valve, grille decontamination machine plays an important role. So, what are the common drainage pump problems? What are the exclusions?
Prev Article
School bus exhaust system inspection method