Transition idlers are found at either end of the conveyor, adjacent to the head and tail pulleys. These idler sets comprise standard idler rolls however the bases into which these rolls are fitted, have a smaller troughing angle to that of the rest of the troughing / carry idlers on the conveyor. Transition Idler Assemblies are available in 3 or 5 roll configurations to suit required belt width, trough angle and roller spacing.
The reason for this is that the conveyor belt is flat as it passes over the pulleys, under high tension. As the belt changes its form to a full trough of say, 35 degrees (i.e. from tail pulley to full trough angle), the belt must be supported through this transition zone. If the belt was fed directly into a full trough from the tail pulley, the belt edges would be over-stressed and damage would result. Similarly, as the troughed angle changes to zero at the head- end, transition idlers provide support through the transition zone. The number of transition idlers required depends on the trough angle of the conveyor.
The number of transition idlers depends on the trough angle of the conveyor. In the case of a 45 degree trough angle, 2 or 3 Transition Idler Sets would be used at either end of the conveyor. As with troughing idlers, transition idlers are available in fixed bases or the garland configuration.
the combination of different XKTE rolling bearings makes it possible to respond to heavy load. Big clearance deep groove ball bearings are utilized in open pit and underground mining.
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Transition Idler Transition Idler,Transition Idler Sets,Cheap Transition Idler Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
 General Products    Â
Application/Service Area
  Metal Parts Solution for Vehicle, Agriculturemachine, Construction Machine, transportation equipment, Valve and Pump system, Agriculture machine metal Parts, engine bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains etc.
 Main blank Process for Forged parts
 Forging , Press
 Blanks Tolerance
+/-0.3~+/-2 mm
 Applicable Material
Carbon steel, Low Carbon steel, middle carbon steel, 40Cr, 20CrMnTi, 20CrNiMo etc.
 Forging Blank Size  /Dimensions
 142 mm- 300mm or according to customer requirement
 Blanks Weight
Range from 0.1kg-1000kg
 Applicable Machining Process
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming etc.
Â
 Machining Tolerance
From 0.005mm-0.01mm-0.1mm
 Machined Surface Quality
Ra 0.8-Ra3.2 according to customer requirement
 Applicable Heat Treatment
Normalization , quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 Applicable Finish Surface  Treatment
Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
 MOQ
For forged parts : 1 Ton
For Machining: 50 Pcs
 Lead Time
45days from the receipt date of deposit for vacuum casting forging turbine blade
Our Package :
 Packing & Delivery  (Show As Above):
Inner Packing →Strong & waterproof plastic big is packed inside, to keep the product in safe condition.
Or as customer requests.
Outer Packing →Multilayer wooden box with strong bandages, used for standard export package.
Or customized as per customer's requirements.
Our Company
            Shanghai Matech Machinery Manufacture Co., Ltd.
                                                  --Branch of Matech Industry Ltd.Â
We specialize in Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system etc.Â
With keeping manufacturing process design, quality planning, key manufacturing processes and final quality control in house.
We are mastering key competence to supply quality mechanical parts and assembly to our customers for both Chinese and Export Market .
To satisfy different mechanical and functional requirements from our customers we are making a big range of metal products for our clients on base of different blanks solutions and technologies.
These blanks solutions and technologies include processes of Iron Casting, Steel Casting, Stainless Steel Casting, Aluminum Casting and Forging.Â
During the early involvement of the customer's design process, we are giving professional input to our customers in terms of process feasibility, cost reduction and function approach.
        You are welcome to contact us for technical enquiry and business cooperation.
Contact Us:
FAQ:
1. Are you a manufacturer or a trading company?
We are a professional manufacturer with over 15 years' export experience for designing and producing vehicle machinery parts.
2. How can I get some samples?
If you need, we are glad to offer you samples for free, but the new clients are expected to pay the courier cost,
and the charge will be deducted from the payment for formal order.
3. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or 3D cad model. If the 3D cad model can be supplied,
the development of the tooling can be more efficient. But without 3D, based on 2D drawing we can still make the samples properly approved.
4. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings for tooling making.
5. What's your quality control device in house?
We have spectrometer in house to monitor the chemical property, tensile test machine to control the mechanical property and UT Sonic as NDT checking method to control the casting detect under the surface of casting.
Good Quality High Precision Hot Press Forging Parts of Flanges
Prev Article
Electric Power Control Actuator for Valves