Made
of multiple strands wound together, the steel Wire Rope is one of the most
crucial components in a Crane. Each strand has a tensile strength ranging
between 1470 N/mm2 and 2160N/mm2.As the load carrying rope used in the hoisting
mechanism, it can be sent through different surface treatment to suit specific
environmental condition.
Advantages
High
strength
Maximum
flexibility
Stable,
quiet operation
Torque
balanced rope is not as easily kinked.
Good
rotary stability
Long use
life
Technical Features
Breaking Strength
Designed
for higher breaking strength and better strength to weight ratio, our crane
wire rope is made of high-toughness steel wires that have been stretched to
their tolerance limit prior to being stranded together to form a rope with
optimum spacing between each strand.
Even
if wire strands are tightly twisted, there still be spaces in places where the
strand touches with each other. To improve the fill factor of the wire rope, we
have added irregularly-shaped wire strand to the rope and sent it through
rotary swaging process. Steel wires that are laid in a parallel pattern
increase the cross section of the rope.
Safety
Special-purpose
steel rope is commonly seen in various engineering projects. Via precision
design and rigorous test, the rope usually can meet very high safety standards.
A large number of wires are arranged in a parallel pattern to form a strand.
Various strands then are twisted to produce the steel rope. Such a rope-making
method ensures an improved safety performance of the rope
Rotation
Our
rotation-resistant wire rope contains several strands laid helically around an
independent rope core. The lay direction of outer strands is opposite to that
of the independent core so that the overall rope can be non-rotating. This
series of rope mainly functions as a lifting tool in the crane. It also can be
used in a rope take-up system that requires many times of rope winding.
Bending Fatigue
Increasing
the number of strands within a rope and wires in a strand can lead to an
extended contact between the rope and the sheave groove or grooved Cable Drum,
thereby reducing the stress acted on average rope. Through adding
irregularly-shaped strand to the wire as well as rotary
Swaging
process, this contact area will increase to greater extent, as with the
decrease of rope stress. Greater flexibility of our steel wire rope means that
it can be wound in smaller, tighter circular patterns. When installing the rope
onto the drum assembly, its steel and plastic combination design will increase
the stability of the whole structure, avoiding internal wire breaking which in
turn extends its use life.
Applications
Port,
waste management, wind power, automobile, transformer, storage and logistics,
steel, container, tunnel, construction machinery, metallurgy, and shipbuilding
industries.
Wire Rope Wire Rope,Crane Wire Rope,High Strength Wire Rope,Quiet Operated Rope,Torque Balanced Rope Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com
2.Technical Data of eps foam block machine supplier
SPB200-800DZ Block Molding Machine with Vacuum (Typical)
Item
Â
SPB200/DZ
SPB300/DZ
SPB400/DZ/
SPB600/DZ
SPB800/DZ
Mould
Cavity
SizeÂ
2040*1240
*1030(mm)3060*1240
*1030(mm)4080*1240
*1030(mm)6100*1240
*1030(mm)8120*1240
*1030(mm)
Block
SizeÂ
2000*1200
*1000(mm)3000*1200
*1000(mm)4000*1200
*1000(mm)6000*1200
*1000(mm)8000*1200
*1000(mm)
Steam
Entry
Consumption
PressureDN65
30-50kg/cycle
0.8MPaDN65
50-70kg/cycle
0.8MPaDN100
60-90kg/cycle
0.8MPaDN100
100-130kg/cycle
0.8MPaDN150
120-170kg/cycle
0.8MPa
Compressed
AirEntry
Consumption
PressureDN40
1.5-2m3/cycle
0.6MPaDN40
1.8-2.2m3/cycle
0.6MPaDN40
2-2.5m3/cycle
0.6MPaDN40
2-3m3/cycle
0.6MPaDN40
2.5-3m3/cycle
0.6MPa
Cooling
WaterEntry
Consumption
PressureDN50
0.4 m3/ cycle
0.4-0.6MPaDN50
0.6 m3/ cycle
0.4-0.6MPaDN50
0.6 m3/ cycle
0.4-0.6MPaDN50
0.6-1 m3/ cycle
0.4-0.6MPaDN50
0.8-1.2m3/ cycle
0.4-0.6MPa
Drainage
Vacuum drain
Steam vent
Condensateφ125mm
φ00mm
φ100mmφ125mm
φ100mm
φ100mmφ125mm
φ200mm
φ100mmφ125mm
φ200mm
φ100mmφ125mm
φ200mm
φ100mm
Throughput
15kg/m3
5min/cycle
6min/cycle
7min/cycle
8min/cycle
8min/cycle
Connected
LoadÂ
20.5-24.5KW
20.5-24.5KW
24.5-35.5KW
24.5-35.5KW
35.5-43.5KW
Overall
Dimension(L*W*H)
5700*4000
*2850(mm)7200*4500
*3000(mm)11000*4500
*3300(mm)12600*3960
*2906(mm)15700*4600
*3400(mm)
Weight
Â
6000kg
7200kg
12000kg
15000kg
18500kg
Room
Height
RequiredÂ
6000mm
6000mm
6000mm
6000mm
6000mm
Vote: We custom make machines according to customer's requirement
3.Features of eps foam block machine supplier
1. EPS machinery With PLC and touch screen to control machine's whole, cycle, including opening mold, closing mold filling, steaming, stabilizing, Vacuum cooling and ejecting.
2. Made with excellent profile steel, through heating process to improve sturdiness, machine can bear high expansion force.
3. With efficient vacuum system for faster steaming and cooling, improve productivity and ensure even density of outer inner block.
4. Adopt advanced block making technology to produce high-density and low-density foam blocks, ensuring even density of outer block.
5. The surface of mold cavity is painted with Teflon, which easies block demoulding and beautifies surface of blocks. Utomatically weighing post-mold blocks.
6. Electronic weighing scale is equipped on block exit line for aEPS Block Molding MachineÂ
4.Application of eps foam block machine supplier
5.Packaging & Shipping
Packing:Â standard exporting packageÂ
Shipping port:Â shanghai/ningbo
6.WE can provided this service of eps Foam Blocks MachineÂ
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc.Â
3. Engineers go to clients' factory in time for installation , training and trial production .Â
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.Â
7.Company Information
 1,Established in 1988, with the 27 years of development ,Fangyuan has development more than 10 offices inside and outside of China, with over 700 staff and covered 100,000 sqm2 workshop.
2,Yearly around 2200 sets machines and 2000 sets EPS moulds outputs, which keep Fangyuan as the leading EPS,XPS,EPP Machinery manufacturer in China. Â
3,Fangyuan is the first drafter of National Standard of EPS machinery in China; And obtained the ISO9001-2008 and European Standard CE certification.
 4,Fangyuan brand was authorized as "China Famous Brand"and "China High Technology Enterprise"Â
Fangyuan EPS Foam Block Machine Supplier>
Model NO.: SPB200-800/DZ
Trademark: FANGYUAN
Transport Package: Wooden Cases
Specification: CE, ISO9001: 2008
Origin: China
HS Code: 847780
1.Pictures of eps foam block machine supplierNext Article
Low Temperature Starting Engine Fluid