V cone flowmeter use maintenance introduction

V cone flowmeter use maintenance introduction

When V cone flow meter is installed and applied on the spot, it can adapt to the measurement of a large number of media, the application is relatively simple, the stability is high, and the installation is relatively simple. But for the site, in order to ensure the stability of the site operation, we need to carry out normal maintenance.

    1 , before the installation, must pass the metrological verification. In the case of confirming compliance with various technical specifications, it can be installed strictly in accordance with the installation requirements of the signal pipeline and differential pressure gauge. For different media, we must refer to the relevant standards for different installation and identification, to achieve a one-to-one correspondence.

2, when put into use , must exclude the air in the exhaust valve in the highest position of the signal pipeline

3, regular cleaning of signal lines, and differential pressure flowmeter, remove all debris.

4, put before use, check the zero position. When checking the zero position, close the two pressure valves on the meter valve and open the balance valve. If zero offset is found, the cause should be ascertained and adjusted.

5, if it is found that the differential pressure flow meter shows significant differences from the measured value, it should be fully checked and repaired, and re-measurement verification.


XS wheel spacers and ATV spacer are Made from High-Strength Aluminum Alloy, designed to give your vehicle a wider, more stable stance, quickly and easily. With the right high pe performance Spacers installed, your car takes on a more aggressive look, with the wheels and tires-filling the wheel arches exactly the way they should. XS Spacers are available in a wide range of sizes, from 5mm all the way to 76mm, depending on the application, letting you position your tires exactly where they will look and perform their best. In many cases, installing the right Spacers can improve the look and function of your existing wheels and tires so much, you might not need to buy new custom wheels and tires at all.

Widen Your Stance-For Better Handling
Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance
Strength-Tested for All Applications
corrosion Protection Through Coating Process-anodizing
Reduced Weight Compared to Steel Wheel Spacers



XS ATV wheel spacers made by professional manufacturer are designed to give your ATV vehicle a wider, more stable stance, quickly and easily. Made from High-Strength Aluminum Alloy, Widen Your Stance-For Better Handling, most popular size: 4-100, 4-110, 4-136, 4-144, 4-156


Hub Centric Rings, designed to fill in the gap between the hub of the car and the center bore of the wheel for averting vibration. There are two kinds of material used, one is PE, another is T6-6061 aluminum.

are designed to fill in the gap between the hub of the car and the center bore of the wheel. Most wheel manufacturers design their wheels with a center bore large enough to fit on most cars. Therefore, since wheel manufactures make their center bore large enough to fit most cars, most wheel fitments have a gap between the hub and the center bore.This gap usually doesn't allow for the wheel to fit hub centric but rather lug centric which causes vibration. Therefore, to fill the gap and ensure the fitment is hub centric, hub rings are used.

top quality lug bolts, lug nuts and wheel locks are COLD FORGED and are tempered to strength class 10.9, XS wheel bolts are made from 40Cr or 40CrMo by cold extrusion machine and chrome layer gives the brilliant appearance with grade 10.9 strength, there are conical seat, radius seat, and Allen key style.




Wheel Parts

Wheel Parts, Wheel Adapter, Atv Wheel Spacers, Wheel Locking Nuts, Wheel Insert

Ningbo Xiangsheng Auto Parts Co., Ltd. , http://www.partsaa.com