Self-priming pump in the course of the common faults are: no response after turning on the power, difficult to start or can not start, the motor can run, but the speed is slow, and the chassis overheating, running noise, vibration, the motor running Small amount of water or no water, the shell charged. Shanghai to provide you with the most professional solutions. First, self-priming pump motor part 1, no response after turning on the power. Most of the power plug, power leads and motor windings caused by a short circuit. 2, difficult to start or can not start, and accompanied by "buzzing" sound. Overhaul can be used when the direction of small bamboo quickly move the fan, if the motor is running quickly, that is starting capacitor or winding damage, should replace the same capacity capacitor or repair winding; if the motor card, mostly motor and pump head Mechanical failure, such as bearing damage, impeller stuck. 3, the motor can run, but the speed is slow, and the chassis overheating, burnt smell. Most of the motor windings caused by a short circuit, the motor should be disassembled, depending on the damage were welding, jumper, isolation, rewinding and other measures to repair. 4, running noise, vibration. Most of the bearing damage or improper bearing with the chassis, the need to open the motor check, if the bearing damage should be replaced; if the bearing runs outside the circle, the shell can be used with the pump face 錾 spent processing; Wear parts of the shaft of the motor used to deal with Kui, serious wear and tear, the use of the method of surfacing after the first surfacing repair. Second, self-priming pump head part 1, the normal operation of the motor but the water is less or no water. This situation should first check the pump seal, check should first unplug the power plug, hand plug the suction port, the pump filled with water, the mouth stuck in the mouth forced inward blowing, observe whether the pump head leaks, leaking Where is the seal damage. Common parts of the faulty suction pad, outlet mat, impeller pad, maintenance should be replaced. If there is no full water phenomenon, mostly impeller damage, between the water chamber and the water chamber between the water within the septum wear, pump head water separated by grinding flat, impeller and the pump housing to increase the gap, etc., should replace the impeller and pump housing . Replace the wheel should pay attention to the complete removal of residual copper pump blades, so as not to damage the new impeller again. 2, the shell charged. Most of the water seal damage, water penetration into the motor shaft through the motor so that the motor insulation performance deterioration can be replaced by water seal, drying motor and other methods of repair. It should be noted that, because the water pump long-term contact with the water and open-air work, easily damp caused insulation performance deterioration, in order to ensure personal safety, electric self-priming pump should be grounded.
The definition
of non-standard Automation Equipment is a customized, user unique, non market
circulation automation system integration equipment, is the use of a unified national assembly unit equipment industry
standards and specifications in accordance with manufacturing, according to
customer needs is the use, development and design of manufacturing equipment.
The technical requirements of different types of customers are not the same.
The automatic assembly line is an effective combination of man and machine, most fully
embodies the flexibility of equipment, it will be a conveying system, clamp and
online machine, testing equipment of organic combination, to meet the
requirements of multiple product assembly. Assembly Line transmission mode has
synchronous transmission / (forced), can also be asynchronous transmission /
(flexible), according to the choice of configuration, realize manual assembly
or semi-Automatic Assembly Machine,full Automatic Machine.
Assembly line is a very important technology. It can be said that any final product with many components and mass production is to some extent produced by assembly line. An assembly line in batch Production Line of factories are indispensable for the enterprise.
Due to the wide range of products, the application of non-standard automation equipment has also been widely used in the application.
The main application of the industry are:
1, the automobile manufacturing industry of automobile parts
manufacturing and installation; production conveying and packaging
2, the food industry;
3, electronic and electrical appliances production line products
transportation;
4, logistics warehousing facilities also has a wide range of
applications;
5, processing and manufacturing industry assembly application,
For example, Our company specializes in manufacturing automatic Assembly Machine for plastic hardware, sanitary assembly machine, production line for door handle,etc.
Production Line and Assembly Line Production Line,Assembly Line,Automatic Assembly Machine,Automatic Machine,Automation Equipment,Assembly Machine Dongguan Rener Automation Technologies Co.,Ltd , https://www.rener-automation.com
Self-priming pump common faults and solutions
ã€Print】 ã€Close】